Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I set up all our Windows hosts with Host MIB - Hard Drive Space [hdd_used] thresholds for a 90% (warning) level and 95% (alert) level all to the same configuration (they all have SNMP Informant installed)
But as you can see, for some reason some servers / disks are failing to report in and just showing as '0' and I don't know what is different that would be causing that?
Also, one of our servers has a 30TB drive with 10TB free and the Thold reports as 151.38% used! So that is a bit confusing too
This may be a net-snmp configuration issue. Can you please check the snmpd.conf setting on the device for the following setting? If it's disabled, enable it. You will have to re-index the device afterward.
realStorageUnits = 0
Make sure it's 0. Cacti attempts to compensate for older version of Net-SNMP by some weird math. However, it's not required in more recent versions of Net-SNMP.
