Get RRD information of graph from CLI

[ahenregsudkan]

Hello,

At first, Thank you for dealing,
We are using a cacti 0.8.8h on our network, and with cli command or commands, I want to find which interface is associated to which rrd's?
Is there any way to do this?
Thanks for reply,

Example:
I want to find the information of this line "DEF:a='/var/www/html/cacti-0.8.8h/rra/XXXXXX_sw_traffic_in_18058.rrd':'traffic_out':"

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start='1543519072' \
--end='1543605472' \
--title='XXXXXX' \
--rigid \
--base='1000' \
--height='120' \
--width='500' \
--alt-autoscale-max \
--lower-limit='0' \
COMMENT:"From 2018/11/29 22\:17\:52 To 2018/11/30 22\:17\:52\c" \
COMMENT:" \n" \
--vertical-label='bits per second' \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a='/var/www/html/cacti-0.8.8h/rra/XXXXXX_sw_traffic_in_18058.rrd':'traffic_out':AVERAGE \
DEF:b='/var/www/html/cacti-0.8.8h/rra/XXXXXX_sw_traffic_in_18058.rrd':'traffic_in':AVERAGE \
CDEF:cdefa='a,8,*' \
CDEF:cdefe='b,8,*' \
AREA:cdefa#00CF00FF:'Downlink' \
GPRINT:cdefa:LAST:'Current\:%8.2lf %s' \
GPRINT:cdefa:AVERAGE:'Average\:%8.2lf %s' \
GPRINT:cdefa:MAX:'Maximum\:%8.2lf %s\n' \
LINE1:cdefe#002A97FF:'Uplink' \
GPRINT:cdefe:LAST:' Current\:%8.2lf %s' \
GPRINT:cdefe:AVERAGE:'Average\:%8.2lf %s' \
GPRINT:cdefe:MAX:'Maximum\:%8.2lf %s\n'

Sincerely,