Mikrotik Plugin, Graph not populated

General discussion about Plugins for Cacti

Moderators: Developers, Moderators

Post Reply
KhaiK
Posts: 1
Joined: Sat May 26, 2018 9:36 pm

Mikrotik Plugin, Graph not populated

Post by KhaiK »

hello,
I have installed cacti 1.1.38 with mikrotik plugin 2.2, the graph for pppoe connections, health, etc, all are populated but for simple queues no graph is being populated. While running spine from command line I can see the output values for that simple queue. I've attached the output of spine,
/usr/local/spine/bin/spine -f=4 -l=5 -C=/usr/local/spine/etc/spine.conf
SPINE: Using spine config file [/usr/local/spine/etc/spine.conf]
SPINE: Version 1.1.38 starting
2018/05/27 07:02:30 - SPINE: Poller[1] DEBUG: In Poller, About to Start Polling of Device for Device ID 5
2018/05/27 07:02:30 - SPINE: Poller[1] Device[5] DEBUG: Entering SNMP Ping
2018/05/27 07:02:30 - SPINE: Poller[1] Updating Full System Information Table
2018/05/27 07:02:30 - SPINE: Poller[1] Device[5] TH[1] RECACHE: Processing 1 items in the auto reindex cache for '10.10.10.251'
2018/05/27 07:02:30 - SPINE: Poller[1] Device[5] TH[1] Recache DataQuery[1] OID: .1.3.6.1.2.1.2.2.1.2.16169533, output: Variable has bad type
2018/05/27 07:02:30 - SPINE: Poller[1] Device[5] TH[1] ASSERT: 'OfficeLan' .eq. 'Variable has bad type' failed. Recaching host '10.10.10.251', data query #1
2018/05/27 07:02:30 - SPINE: Poller[1] Device[5] TH[1] NOTE: There are '3' Polling Items for this Device
2018/05/27 07:02:30 - SPINE: Poller[1] Device[5] TH[1] DS[22] SS[0] SERVER: /usr/share/cacti/plugins/mikrotik/templates/scripts/ss_mikrotik_queues.php ss_mikrotik_queues '5' 'get' 'qsInOctets' '---TEST_BANDWIDTH', output: 6851841
2018/05/27 07:02:30 - SPINE: Poller[1] Device[5] TH[1] DS[16] SS[0] SERVER: /usr/share/cacti/plugins/mikrotik/templates/scripts/ss_mikrotik_snmpget.php ss_mikrotik_snmpget '5' '.1.3.6.1.4.1.9.9.150.1.1.1.0', output: 101
2018/05/27 07:02:30 - SPINE: Poller[1] Device[5] TH[1] DS[22] SS[0] SERVER: /usr/share/cacti/plugins/mikrotik/templates/scripts/ss_mikrotik_queues.php ss_mikrotik_queues '5' 'get' 'qsOutOctets' '---TEST_BANDWIDTH', output: 1273000
2018/05/27 07:02:30 - SPINE: Poller[1] Device[5] TH[1] Total Time: 0.059 Seconds
2018/05/27 07:02:30 - SPINE: Poller[1] Device[5] TH[1] DEBUG: HOST COMPLETE: About to Exit Device Polling Thread Function
2018/05/27 07:02:30 - SPINE: Poller[1] DEBUG: The Value of Active Threads is 0 for Device ID 5
2018/05/27 07:02:30 - SPINE: Poller[1] DEBUG: In Poller, About to Start Polling of Device for Device ID 4
2018/05/27 07:02:30 - SPINE: Poller[1] Device[4] DEBUG: Entering SNMP Ping
2018/05/27 07:02:30 - SPINE: Poller[1] Updating Full System Information Table
2018/05/27 07:02:30 - SPINE: Poller[1] Device[4] TH[1] Device has no information for recache.
2018/05/27 07:02:30 - SPINE: Poller[1] Device[4] TH[1] NOTE: There are '1' Polling Items for this Device
2018/05/27 07:02:30 - SPINE: Poller[1] Device[4] DEBUG: The NIFTY POPEN returned the following File Descriptor 8
2018/05/27 07:02:31 - SPINE: Poller[1] Device[4] TH[1] DS[14] SCRIPT: perl /usr/share/cacti/scripts/unix_processes.pl, output: 95
2018/05/27 07:02:31 - SPINE: Poller[1] Device[4] TH[1] Total Time: 0.036 Seconds
2018/05/27 07:02:31 - SPINE: Poller[1] Device[4] TH[1] DEBUG: HOST COMPLETE: About to Exit Device Polling Thread Function
2018/05/27 07:02:31 - SPINE: Poller[1] DEBUG: The Value of Active Threads is 0 for Device ID 4
SPINE: Time: 1.3500 s, Threads: 1, Devices: 2

--
This is my first time with cacti and totally screwed.
:( :( :(
elxer
Posts: 4
Joined: Mon Aug 20, 2018 11:36 am

Re: Mikrotik Plugin, Graph not populated

Post by elxer »

+1 for the above issue. Dynamic PPPOE interface graphs are not getting populated. Rest working ok
netniV
Cacti Guru User
Posts: 3441
Joined: Sun Aug 27, 2017 12:05 am

Re: Mikrotik Plugin, Graph not populated

Post by netniV »

Can you query your device using snmpwalk and the oid 1.3.6.1.2.1.2.2.1.2.16169533?
Cacti Developer & Release Manager
The Cacti Group

Director
BV IT Solutions Ltd

+--------------------------------------------------------------------------+

Cacti Resources:
Cacti Website (including releases)
Cacti Issues
Cacti Development Releases
Cacti Development Documentation
elxer
Posts: 4
Joined: Mon Aug 20, 2018 11:36 am

Re: Mikrotik Plugin, Graph not populated

Post by elxer »

Yes i can query my device using snmp and oid-1.3.6.1.2.1.2.2.1.2.16169533 but it returns no value

Apart from this i would like to add that rest all static interface graphs are working properly on this same device.
For the same PPPOE interface and simple queue i am getting graphs. But not through mikrotik template.
Attachments
2018-08-21 (1).png
2018-08-21 (1).png (296.68 KiB) Viewed 2942 times
netniV
Cacti Guru User
Posts: 3441
Joined: Sun Aug 27, 2017 12:05 am

Re: Mikrotik Plugin, Graph not populated

Post by netniV »

Cacti can't graph something that isn't being returned :)
Cacti Developer & Release Manager
The Cacti Group

Director
BV IT Solutions Ltd

+--------------------------------------------------------------------------+

Cacti Resources:
Cacti Website (including releases)
Cacti Issues
Cacti Development Releases
Cacti Development Documentation
elxer
Posts: 4
Joined: Mon Aug 20, 2018 11:36 am

Re: Mikrotik Plugin, Graph not populated

Post by elxer »

Is their any issue with mikrotik template? Since cacti is correctly reading interface stats and mapping it also. :(
And how does cacti manages changing oid of dynamic interfaces?
netniV
Cacti Guru User
Posts: 3441
Joined: Sun Aug 27, 2017 12:05 am

Re: Mikrotik Plugin, Graph not populated

Post by netniV »

Don't know as I don't have a MicroTik device to test again. If you'd like to send me one I can test it out ;-)
Cacti Developer & Release Manager
The Cacti Group

Director
BV IT Solutions Ltd

+--------------------------------------------------------------------------+

Cacti Resources:
Cacti Website (including releases)
Cacti Issues
Cacti Development Releases
Cacti Development Documentation
elxer
Posts: 4
Joined: Mon Aug 20, 2018 11:36 am

Re: Mikrotik Plugin, Graph not populated

Post by elxer »

netniV wrote:Don't know as I don't have a MicroTik device to test again. If you'd like to send me one I can test it out ;-)
:lol: I can give you my mikrotik device snmp feed over public ip with full access.
netniV
Cacti Guru User
Posts: 3441
Joined: Sun Aug 27, 2017 12:05 am

Re: Mikrotik Plugin, Graph not populated

Post by netniV »

That would work. Send me a PM with the details and I'll try and get to it before the weekend.
Cacti Developer & Release Manager
The Cacti Group

Director
BV IT Solutions Ltd

+--------------------------------------------------------------------------+

Cacti Resources:
Cacti Website (including releases)
Cacti Issues
Cacti Development Releases
Cacti Development Documentation
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests