[Help] Label with temperature OID from graph

[felippedeabreu]

Hello, I'm new here and I'm having trouble putting a value inside a tag in weathermap and I'm not getting it.

I created a chart collecting the temperature of a change through the MIB and I would like the collected value to appear inside this label but I have already tried everything and I can not at all.

What I want to do is put the collected temperature value inside a label!
Any light?

[Pucho]

You could start by showing your weathermap config what result are you getting.

[felippedeabreu]

You could start by showing your weathermap config what result are you getting.

OK sorry!

Well, I created a graph via the "data templates", using the OID I need to reach the device. I created a graphic through this template and that's it, the graphics is being done.

I'm currently using weathermap 0.98, but even in 0.97 it was not working.


What I needed is that in the weathermap the current temperature value of the device appears inside the label.
I've tried several ways that I found in the forums, and the ones that I came closest was this:

NODE G
LABEL G
TARGET snmp:un03st3ro:10.10.92.32:.1.3.6.1.4.1.1916.1.1.1.8.0:-
POSITION 587 109
// this turns blue, which in my table would be 25 to 40% (which is correct, but the number does not appear)


The result I want to appear is "28" inside the label. . . Not just the color, according to the snmpwalk.


root@gerenciamento:~# snmpwalk -O n -c un03st3ro -v1 10.10.92.32 .1.3.6.1.4.1.1916.1.1.1.8.0 | Cut -d: -f 2
 28

or



root@gerenciamento:~# snmpwalk -O n -c un03st3ro -v1 10.10.92.32 .1.3.6.1.4.1.1916.1.1.1.8.0
.1.3.6.1.4.1.1916.1.1.1.8.0 = INTEGER: 28

I have attached an image that is the configuration of data templates

[Howie]

You haven't asked weathermap to add any value to your label.

Code: Select all

NODE G
    LABEL G {node:this:bandwidth_in}
    TARGET snmp:un03st3ro:10.10.92.32:.1.3.6.1.4.1.1916.1.1.1.8.0:-
    POSITION 587 109

That will add the value collected for the "input bandwidth" of your node to the end of the label text.

[felippedeabreu]

You haven't asked weathermap to add any value to your label.

Code: Select all

NODE G
    LABEL G {node:this:bandwidth_in}
    TARGET snmp:un03st3ro:10.10.92.32:.1.3.6.1.4.1.1916.1.1.1.8.0:-
    POSITION 587 109

That will add the value collected for the "input bandwidth" of your node to the end of the label text.

ops, "I tried everything" LESS THAN

Thank you very much!

A simple thing that made me disperceived