Hello my friend
I got Cactiinstall on Debian
All settings are correct
Graf was recorded for a few minutes but then the graph is not recorded
If you can help
I desperately need to Cacti
Thank
no graph for cacti
Moderators: Developers, Moderators
no graph for cacti
- Attachments
-
- 33.jpg (61.77 KiB) Viewed 832 times
-
- 22.jpg (113.01 KiB) Viewed 832 times
-
rony
- Developer/Forum Admin
- Posts: 6022
- Joined: Mon Nov 17, 2003 6:35 pm
- Location: Michigan, USA
- Contact:
Re: no graph for cacti
?
[size=117][i][b]Tony Roman[/b][/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
Re: no graph for cacti
Hi. I have the same issue.
Basically I installed cacti 1.1.12 on centOS 6.9.
Nothing in the logs:
2017/07/31 13:50:01 - POLLER: Poller[1] NOTE: Poller Int: '300', Cron Int: '300', Time Since Last: '300.96', Max Runtime '298', Poller Runs: '1'
2017/07/31 13:50:02 - PING Device[1] PING: Ping not performed due to setting.
2017/07/31 13:50:02 - POLLER: Poller[1] Time: 0.1315 s, Poller: , Theads: N/A, Devices: 1
2017/07/31 13:50:02 - PING Device[3] SNMP: Device responded to SNMP
2017/07/31 13:50:02 - POLLER: Poller[1] Time: 0.6204 s, Poller: , Theads: N/A, Devices: 1
2017/07/31 13:50:03 - POLLER: Poller[1] Parsed MULTI output field '1min:0.00' [map 1min->load_1min]
2017/07/31 13:50:03 - POLLER: Poller[1] Parsed MULTI output field '5min:0.03' [map 5min->load_5min]
2017/07/31 13:50:03 - POLLER: Poller[1] Parsed MULTI output field '10min:0.00' [map 10min->load_15min]
2017/07/31 13:50:03 - SYSTEM STATS: Time:1.2310 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:21 RRDsProcessed:19
2017/07/31 13:55:01 - POLLER: Poller[1] NOTE: Poller Int: '300', Cron Int: '300', Time Since Last: '300.56', Max Runtime '298', Poller Runs: '1'
2017/07/31 13:55:01 - PING Device[1] PING: Ping not performed due to setting.
2017/07/31 13:55:01 - POLLER: Poller[1] Time: 0.1233 s, Poller: , Theads: N/A, Devices: 1
2017/07/31 13:55:02 - PING Device[3] SNMP: Device responded to SNMP
2017/07/31 13:55:02 - POLLER: Poller[1] Time: 0.8146 s, Poller: , Theads: N/A, Devices: 1
2017/07/31 13:55:02 - POLLER: Poller[1] Parsed MULTI output field '1min:0.04' [map 1min->load_1min]
2017/07/31 13:55:02 - POLLER: Poller[1] Parsed MULTI output field '5min:0.02' [map 5min->load_5min]
2017/07/31 13:55:02 - POLLER: Poller[1] Parsed MULTI output field '10min:0.00' [map 10min->load_15min]
2017/07/31 13:55:02 - SYSTEM STATS: Time:1.2365 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:21 RRDsProcessed:19
It was working for couple of minutes but not any more. Any ideas how to debug the issue and make it work?
BTW all the graphs stopped working at the same time.
Basically I installed cacti 1.1.12 on centOS 6.9.
Nothing in the logs:
2017/07/31 13:50:01 - POLLER: Poller[1] NOTE: Poller Int: '300', Cron Int: '300', Time Since Last: '300.96', Max Runtime '298', Poller Runs: '1'
2017/07/31 13:50:02 - PING Device[1] PING: Ping not performed due to setting.
2017/07/31 13:50:02 - POLLER: Poller[1] Time: 0.1315 s, Poller: , Theads: N/A, Devices: 1
2017/07/31 13:50:02 - PING Device[3] SNMP: Device responded to SNMP
2017/07/31 13:50:02 - POLLER: Poller[1] Time: 0.6204 s, Poller: , Theads: N/A, Devices: 1
2017/07/31 13:50:03 - POLLER: Poller[1] Parsed MULTI output field '1min:0.00' [map 1min->load_1min]
2017/07/31 13:50:03 - POLLER: Poller[1] Parsed MULTI output field '5min:0.03' [map 5min->load_5min]
2017/07/31 13:50:03 - POLLER: Poller[1] Parsed MULTI output field '10min:0.00' [map 10min->load_15min]
2017/07/31 13:50:03 - SYSTEM STATS: Time:1.2310 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:21 RRDsProcessed:19
2017/07/31 13:55:01 - POLLER: Poller[1] NOTE: Poller Int: '300', Cron Int: '300', Time Since Last: '300.56', Max Runtime '298', Poller Runs: '1'
2017/07/31 13:55:01 - PING Device[1] PING: Ping not performed due to setting.
2017/07/31 13:55:01 - POLLER: Poller[1] Time: 0.1233 s, Poller: , Theads: N/A, Devices: 1
2017/07/31 13:55:02 - PING Device[3] SNMP: Device responded to SNMP
2017/07/31 13:55:02 - POLLER: Poller[1] Time: 0.8146 s, Poller: , Theads: N/A, Devices: 1
2017/07/31 13:55:02 - POLLER: Poller[1] Parsed MULTI output field '1min:0.04' [map 1min->load_1min]
2017/07/31 13:55:02 - POLLER: Poller[1] Parsed MULTI output field '5min:0.02' [map 5min->load_5min]
2017/07/31 13:55:02 - POLLER: Poller[1] Parsed MULTI output field '10min:0.00' [map 10min->load_15min]
2017/07/31 13:55:02 - SYSTEM STATS: Time:1.2365 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:21 RRDsProcessed:19
It was working for couple of minutes but not any more. Any ideas how to debug the issue and make it work?
BTW all the graphs stopped working at the same time.
Re: no graph for cacti
Well it works for 10 min and then stops working.
- Attachments
-
- Screen Shot 2017-07-31 at 14.35.24.png (23.47 KiB) Viewed 655 times
Re: no graph for cacti
Your cacti availability check is failing. Increase timeouts and/or retries.
Before history, there was a paradise, now dust.
Re: no graph for cacti
Thanks Osiris. It started to work itself but if something I will try the timeouts.
Who is online
Users browsing this forum: No registered users and 0 guests