Graph not displaying for new devices

[EOS1]

Hey Guys!

I added a device but the graph is not showing/displaying. All of the other devices graphs are displaying normal.

Here is the debug info if that's helpful...

RRDTool Command:
/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start='-86400' \
--end='-300' \
--title='EGB-MPLS-WS_Router - Traffic - Gi0/0' \
--rigid \
--base='1000' \
--height='120' \
--width='500' \
--alt-autoscale-max \
--lower-limit='0' \
--vertical-label='bits per second' \
--slope-mode \
--font TITLE:10: \
--font AXIS:7: \
--font LEGEND:8: \
--font UNIT:7: \
DEF:a='/usr/share/cacti/rra/egb-mpls-ws_router_traffic_in_1003.rrd':'traffic_in':AVERAGE \
DEF:b='/usr/share/cacti/rra/egb-mpls-ws_router_traffic_in_1003.rrd':'traffic_out':AVERAGE \
CDEF:cdefa='a,8,*' \
CDEF:cdeff='b,8,*' \
CDEF:cdefbe='a,UN,INF,UNKN,IF' \
CDEF:cdefbh='TIME,1498066805,GT,a,a,UN,0,a,IF,IF,TIME,1498066805,GT,b,b,UN,0,b,IF,IF,+' \
AREA:cdefa#00CF00FF:'Inbound' \
GPRINT:cdefa:LAST:' Current\:%8.2lf %s' \
GPRINT:cdefa:AVERAGE:'Average\:%8.2lf %s' \
GPRINT:cdefa:MAX:'Maximum\:%8.2lf %s\n' \
COMMENT:'Transfer\: 6.12 GB' \
LINE1:cdeff#002A97FF:'Outbound' \
HRULE:|95\:bits\:0\:current|#00FF00FF:'95%\:' \
GPRINT:cdeff:LAST:'Current\:%8.2lf %s' \
GPRINT:cdeff:AVERAGE:'Average\:%8.2lf %s' \
COMMENT:'|95\:bits\:6\:current| mbit\n' \
GPRINT:cdeff:MAX:'Maximum\:%8.2lf %s\n' \
COMMENT:' \n' \
HRULE:3498511.54#FF0000FF:'95th Percentile' \
COMMENT:'(3.5 mbit in+out)' \
AREA:cdefbe#8F9286FF:'' \
COMMENT:'Transfer\: 11.95 GB' \
HRULE:|95\:bits\:0\:current|#0000FFFF:'95%\:' \
COMMENT:'5.32 mbit' \
COMMENT:'Total Transfer\: 18.07 GB\n'

RRDTool Says:

Thank you in advance..

[EOS1]

Looked through the Cacti Log File, and there is nothing jumping out in there..

[EOS1]

Verified that '/usr/share/cacti/rra/egb-mpls-ws_router_traffic_in_1003.rrd' file has the correct permissions. Same permission as the ones that do work...

It must be something simple that I'm overlooking.. Any ideas?

[EOS1]

Bump

Any ideas for me?

[Pucho]

Selinux?

[EOS1]

Thanks for the reply!

I will look at that right now..