No graphs showing

[chardify]

Hi guys this is the first time i tried setting up cacti. well I have a Tp-link load balancer tl-r470t+ and that's what im trying to monitor. well the status of the device is up as shown under status in cacti. but my graph is only showing the cacti logo. and here is the debug log for the graph.

Code: Select all

 	RRDTool Command:

c:/xampp/htdocs/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start="-180000" \
--end="-300" \
--pango-markup  \
--title="TP-Link router - Traffic - eth0/2" \
--vertical-label="bits per second" \
--slope-mode \
--base=1000 \
--height=150 \
--width=600 \
--alt-y-grid \
--rigid \
--alt-autoscale-max \
--lower-limit="0" \
--border 1 --slope-mode \
--watermark "Generated by Cacti®" \
DEF:a="C\:/xampp/htdocs/cacti/rra/tp-link_router_traffic_in_31.rrd":"traffic_in":MAX \
DEF:b="C\:/xampp/htdocs/cacti/rra/tp-link_router_traffic_in_31.rrd":"traffic_in":AVERAGE \
DEF:c="C\:/xampp/htdocs/cacti/rra/tp-link_router_traffic_in_31.rrd":"traffic_out":MAX \
DEF:d="C\:/xampp/htdocs/cacti/rra/tp-link_router_traffic_in_31.rrd":"traffic_out":AVERAGE \
CDEF:cdefa="a,8,*" \
CDEF:cdefb="b,8,*" \
CDEF:cdeff="c,8,*" \
CDEF:cdefg="d,8,*" \
LINE1:cdefa#00CF00FF:""  \
AREA:cdefb#00CF007F:"Inbound "  \
GPRINT:cdefb:LAST:"Current\:%8.2lf %s"  \
GPRINT:cdefb:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefb:MAX:"Maximum\:%8.2lf %s\n"  \
LINE1:cdeff#002A97FF:""  \
AREA:cdefg#002A977F:"Outbound"  \
GPRINT:cdefg:LAST:"Current\:%8.2lf %s"  \
GPRINT:cdefg:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefg:MAX:"Maximum\:%8.2lf %s\n" 

RRDTool Says:

I really need your help on fixing this one. thank you!

[SveTel]

Hello,

when you enable Graph debug mode. Which Error message do you get after "RRDTool Says:" ?

SveTel