Cacti 1.1 high collection rate and system rate problem

[Rno]

I have a setting where I have a 5minutes polling interval (CPU usage with system collection rate) and 30seconds polling (high collection rate interface traffic)
But the CPU is not filled, it's still NAN, and before changing the interface from system to high colleciton it was working

Like there is a conflict with 2 polling value on the same host.

[MoonDogg]

I am having the same issue. If I use the High collection Rate data profile I get gaps in my graph's.

[Osiris]

You poller needs to be set t o the highest rate, and you need to repopulate your poller cache.

[MoonDogg]

You poller needs to be set t o the highest rate, and you need to repopulate your poller cache.

That is what I did, or so I thought. I set poller to 30 sec. and reset pollar cache. Then change a few templetes to high collection rate. It seems to work fine with no errors, except my graphs get gaps. Maybe I'll try again and see what happens.

[Osiris]

Use rrdtool info on the rrdfiles. There is also Data Source info mode that might help you.