Spine error

[Vivek]

PM - SPINE: Poller[1] ERROR: --mibs is an unknown command-line parameter (Spine init)



please help with these error of spine cacti

[cigamit]

Not enough info. Version? OS?

[Vivek]

Its is on centos 7
Cacti version 1.0.4
Spine version 0.8.8h

[cigamit]

Its is on centos 7
Cacti version 1.0.4
Spine version 0.8.8h

Please update your spine version to be the same as your Cacti version. I believe this was fixed in 1.0.0

https://github.com/Cacti/spine/blob/develop/ChangeLog
-feature: Collect System Mib Information

[Vivek]

After updating I ma getting these error and devices dont update

POLLER: Poller[1] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '300' seconds, with a maximum of a '300' second Cron, but 390.7 seconds have passed since the last poll!
OK u:0.00 s:0.00 r:0.01
OK u:0.00 s:0.00 r:0.01
OK u:0.00 s:0.00 r:0.01
OK u:0.00 s:0.00 r:0.01
OK u:0.00 s:0.00 r:0.01
2017-04-03 10:04:13 - POLLER: Poller[1] Maximum runtime of 298 seconds exceeded. Exiting.
2017-04-03 10:04:13 - SYSTEM STATS: Time:298.9165 Method:spine Processes:5 Threads:8 Hosts:6 HostsPerProcess:2 DataSources:14 RRDsProcessed:5
2017-04-03 10:04:13 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal
2017-04-03 10:04:13 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal
2017-04-03 10:04:14 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal
2017-04-03 10:04:14 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal


Please help.

[cigamit]

Run the spine binary manually, it is most likely throwing errors (can be as simple as config issue).

cd <spine_dir>
./spine --mibs -R -S -V 5

[Vivek]

Did this.. Gives me follwing error


SPINE: Poller[1] FATAL: Unable to read configuration file! (Spine init)

[cigamit]

Did this.. Gives me follwing error


SPINE: Poller[1] FATAL: Unable to read configuration file! (Spine init)

Where is your spine binary located in relation to your spine.conf ?

[Vivek]

Run the spine binary manually, it is most likely throwing errors (can be as simple as config issue).

cd <spine_dir>
./spine --mibs -R -S -V 5


Did this... still showing me below error


POLLER: Poller[1] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '300' seconds, with a maximum of a '300' second Cron, but 1.0 K seconds have passed since the last poll!
2017-04-03 11:39:50 - POLLER: Poller[1] WARNING: There are '1' detected as overrunning a polling process, please investigate
2017-04-03 11:39:50 - POLLER: Poller[1] WARNING: Poller Output Table not Empty. Issues Found: 5, Data Sources: proc(DS[1]), (DS[2]), users(DS[3]), mem_buffers(DS[4]), mem_swap(DS[5])
OK u:0.00 s:0.00 r:0.02
OK u:0.00 s:0.00 r:0.02
OK u:0.00 s:0.00 r:0.02
OK u:0.00 s:0.00 r:0.02
OK u:0.00 s:0.00 r:0.02
2017-04-03 11:44:49 - POLLER: Poller[1] Maximum runtime of 298 seconds exceeded. Exiting.
2017-04-03 11:44:49 - SYSTEM STATS: Time:299.0054 Method:spine Processes:5 Threads:8 Hosts:6 HostsPerProcess:2 DataSources:14 RRDsProcessed:5
2017-04-03 11:44:49 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal
2017-04-03 11:44:49 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal
2017-04-03 11:44:49 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal
2017-04-03 11:44:49 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal
2017-04-03 11:44:49 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal
2017-04-03 11:44:49 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal
2017-04-03 11:44:49 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal
2017-04-03 11:44:49 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal
2017-04-03 11:44:49 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal
2017-04-03 11:44:49 - SPINE: Poller[1] ERROR: Spine Timed Out While Processing Devices Internal