[SOLVED] problem HP procure 1810-24G

[tocks]

Hello,

I have add a Hp procure 1810-24G, i use cisco host template

I had a graph on one port



I don't understant why inbound is to 0 .

It not possible ...

Can you help me ?

Thanks

[micke2k]

On the host, click on DS to see what snmp query its related to. Then look in your snmp cache for Host and see what OID cacti is polling for DS. Manually snmpget/snmpwalk that OID yourself and see if its valid or no.

Taken from here:

http://forums.cacti.net/viewtopic.php?f=21&t=21089

[tocks]

thanks for your reply, but it's not my problem.

Chart randomly display the inbound or outbound

I check on my switch the port 23



but on this port 23, i have connect a ds1815+ synology. And i check this host in cacti

The graph :



normally the two graphics should be the same

[tocks]

nobody can help me on this problem ?

[micke2k]

Well, start by snmpwalking that OID when the graph gaps happens.

[tocks]

thanks for your reply. Sorry for my answer, but it's my first monitoring switch with snmp

my snmpwalking in attached file


my poller cache :



My logs, i can see cacti can see every time find a value



1)I can see where in the logs, the value recovers cacti?

2) When i can read the rrd file ?


you have an idea of the problem?

[tocks]

thanks for your help, i have sold my problem to upgrade firmware of the switch.

THANKS A LOT

[micke2k]

thanks for your help, i have sold my problem to upgrade firmware of the switch.

THANKS A LOT

Good catch! Glad it works now!

[baxa3d]

Please help me which template i use to monitoring hp switch 1810 24g gigabit traffic ?????

[baxa3d]

Hello,

I have add a Hp procure 1810-24G, i use cisco host template

I had a graph on one port



I don't understant why inbound is to 0 .

It not possible ...

Can you help me ?

Thanks

Hi,Please help which template you use ?can yo send me this cisco host template ?i use host template get snmp or cisco router ...hp switch 1810 24g dont work correctly because switch dont supported 64-bit counters