Empty data queries in cacti, but snmpwalk works

[TOASTER]

Hello

I am running here cacti 8.8a + spine with 50-100 monitored hosts. Last time I got 2 new Windows 7 machines. Mysteriously when tried to add data queries to them I got few empty results.

aa.png (25.35 KiB) Viewed 587 times

Obviously no graphs can be made for mounted partitions and processors, yet when I moved to console:

Code: Select all

root@cacti:~# snmpwalk -v2c -c <sth> <ip> .1.3.6.1.2.1.25.2.3.1
iso.3.6.1.2.1.25.2.3.1.1.1 = INTEGER: 1
iso.3.6.1.2.1.25.2.3.1.1.2 = INTEGER: 2
iso.3.6.1.2.1.25.2.3.1.1.3 = INTEGER: 3
iso.3.6.1.2.1.25.2.3.1.1.4 = INTEGER: 4
iso.3.6.1.2.1.25.2.3.1.1.5 = INTEGER: 5
iso.3.6.1.2.1.25.2.3.1.2.1 = OID: iso.3.6.1.2.1.25.2.1.4
iso.3.6.1.2.1.25.2.3.1.2.2 = OID: iso.3.6.1.2.1.25.2.1.4
iso.3.6.1.2.1.25.2.3.1.2.3 = OID: iso.3.6.1.2.1.25.2.1.7
iso.3.6.1.2.1.25.2.3.1.2.4 = OID: iso.3.6.1.2.1.25.2.1.3
iso.3.6.1.2.1.25.2.3.1.2.5 = OID: iso.3.6.1.2.1.25.2.1.2
iso.3.6.1.2.1.25.2.3.1.3.1 = STRING: "C:\\ Label:  Serial Number 989753e7"
iso.3.6.1.2.1.25.2.3.1.3.2 = STRING: "D:\\ Label:  Serial Number 84914aef"
iso.3.6.1.2.1.25.2.3.1.3.3 = STRING: "E:\\"
iso.3.6.1.2.1.25.2.3.1.3.4 = STRING: "Virtual Memory"
iso.3.6.1.2.1.25.2.3.1.3.5 = STRING: "Physical Memory"
iso.3.6.1.2.1.25.2.3.1.4.1 = INTEGER: 4096
iso.3.6.1.2.1.25.2.3.1.4.2 = INTEGER: 4096
iso.3.6.1.2.1.25.2.3.1.4.3 = INTEGER: 0
iso.3.6.1.2.1.25.2.3.1.4.4 = INTEGER: 65536
iso.3.6.1.2.1.25.2.3.1.4.5 = INTEGER: 65536
iso.3.6.1.2.1.25.2.3.1.5.1 = INTEGER: 121987944
iso.3.6.1.2.1.25.2.3.1.5.2 = INTEGER: 122094608
iso.3.6.1.2.1.25.2.3.1.5.3 = INTEGER: 0
iso.3.6.1.2.1.25.2.3.1.5.4 = INTEGER: 162487
iso.3.6.1.2.1.25.2.3.1.5.5 = INTEGER: 65011
iso.3.6.1.2.1.25.2.3.1.6.1 = INTEGER: 9757378
iso.3.6.1.2.1.25.2.3.1.6.2 = INTEGER: 661757
iso.3.6.1.2.1.25.2.3.1.6.3 = INTEGER: 0
iso.3.6.1.2.1.25.2.3.1.6.4 = INTEGER: 26618
iso.3.6.1.2.1.25.2.3.1.6.5 = INTEGER: 22807
iso.3.6.1.2.1.25.2.3.1.7.1 = Counter32: 0
iso.3.6.1.2.1.25.2.3.1.7.2 = Counter32: 0
iso.3.6.1.2.1.25.2.3.1.7.3 = Counter32: 0
iso.3.6.1.2.1.25.2.3.1.7.4 = Counter32: 0
iso.3.6.1.2.1.25.2.3.1.7.5 = Counter32: 0

Not sure how to check the processor information, but the partition information is here. Both hosts behave the same. What is wrong, any ideas?

[phalek]

what does it tell you when you click on "Verbose query" ?

[TOASTER]

ddd.png (38.44 KiB) Viewed 555 times