SOLVED reload Cacti default Windows SNMP agent

[xq1xq1xq1]

Apparently I accidentally nuked Cacti default Windows SNMP agent a few years back

Does anyone have any idea how to load Cacti default Windows SNMP agent back in?

I am trying to get disk space/memory and cpu graphs for win7/8/10 computers and assume that the generic windows SNMP settings should give me what I need

http://forums.cacti.net/about30756.html

Thanx alot!

[BSOD2600]

first, http://docs.cacti.net/faq#why_doesn_t_w ... e_via_snmp
second, increase the snmp timeout in cacti to 5000 ms
third, add/remove windows feature -- remove snmp agent and then install it again?

[xq1xq1xq1]

Thanx so much for your reply - I actually did not look at the config there before but it was set up correctly as per the link you gave me.

What I have accidentally removed was the CACTI templates for windows DISKS/MEMORY/CPU graphs and data sources within Cacti Itself.

Any words of wisdom will be much appreciated!

[xq1xq1xq1]

Did some more digging on what you were saying and found out that if I use SNMP Enabled Host for the Windows Device:

-Hypervisor 2012 Virtual Machine - I get Interfaces, CPU and Memory and Disk Space (Not total Disk space just used)

Hypervisor Server data queries with interface, cpu, memory and disk being returned

Hypervisor-Virtual 2012-server-dataqueries.jpg (52.4 KiB) Viewed 1594 times

snmp services

hypervisor-virtual-snmp-services

Hypervisor-Virtual-2012-server-snmp-services.jpg (20.81 KiB) Viewed 1558 times

-Physical 2012 Server Machine - I only get Interfaces and not CPU or Memory or Disk Space

Physical Server Data queries with only Interfaces being returned

Physical-2012-server-dataqueries.jpg (65.87 KiB) Viewed 1594 times

snmp services:

Physical-server-snmp-services

Physical-2012-server-snmp-services.jpg (19.88 KiB) Viewed 1558 times

Anyone have any thoughts as to why I get the different data queries for a physical rather than a virtual 2012 server installation?

Thanx alot!