Installed/configured and graphing avay with most of the predefined Data Sources execpt
I have a problem with SNMP and Cacti.
Snmpwalk and snmpget works as expected in console.
Data Source/Edit Data gives:
INTERNAL: [10.0.0.1/public] Interface: [1]
/usr/local/rrdtool-1.0.39/bin/rrdtool update /home/cacti/cacti/rra/c350.rrd --template c350 N:U
SNMP interfaces shows the host with the right info, while Refresh Interfaces produces nothing (expected behavior since this should update SQL table?)
View Gathered Interfaces shows no interfaces.
There are no error txt in the web interface. But when I try to run the same commands in console i get some numbers returned before the process exits (needs me to press enter to get exit process feedback.)
root@xxxx:/home/cacti/cacti-0.6.8a# php snmp_interfaces.php?id=1&PHPSESSID=074157d66ca292b3d2146ce568229c50
[1] 32376
root@xxxx:/home/cacti/cacti-0.6.8a# <Enter>
[1]+ Exit 255 php snmp_interfaces.php?id=1
(tried this as root, nobody(webuser) and cacti)
Cron printout shows no data for SNMP devices.
I've tried on several different boxes: Cisco 4000, Cisco 3500, Cisco 677, Cisco 350, Cisco 2600, HP 4000M, HP2424, HP2524 and a couple of more.
Now I'm really stuck. I don't know where to go and what looks like the most promising performance collector can't do anything for me
Using Slackware 8.1 but with compiled components (Apache, Php s.o)
php.log show nothing interesting when itry to run typically View Gathered Interfaces or Refresh interfaces
I'll be more than willing to test and post results and other information if anything else i needed to understand this behaviour.
Are there anyone out there that has experienced the same problems or can point me in the right direction? Is it cacti configuration, snmp-configuration, php compiling/configuration. Or anything else I can look into to solve this?
Mike