Fritzbox Monitoring Template

[blubbersuelze]

Hi,

i wrote a Template to monitor a Fritzbox.
Maybe it's useful for others, too

It monitores

• Traffic

• Signal Power

• Attenuation

• Noise Margin

• Max possible Datarate

• Max usable Datarate

Installation instructions are included in Zip Archive.

and looks like this:

[Dopamin2485]

Hi

Thank you for your script. I tested it with my Fritzbox 7490 with 06.51 Firmware but my graphs show always NaN.

I copy the script in the script folder and import the template.
I entered the fritzbox password but the graphs show always NaN???

Anybody knows what can be wrong?

Thanks

Dopamin2485

[blubbersuelze]

Hi,

did you enabled "Application Access allowed" in

Network -> Overview -> Networksettings?

greetings,
blubbersuelze

[Dopamin2485]

Thanks for your help.

Sorry i am from Germany and the fritzbox runs in german language.
Did you mean these Settings?

fritz_cacti2.PNG (68.2 KiB) Viewed 10205 times

I think Application Access is enabled.

Did you use firmware > 6.50 on your fritzbox?

In the Cacti Logfile i get this error:

06/28/2016 02:10:09 PM - CMDPHP: Poller[0] Host[4] DS[21] WARNING: Result from CMD not valid. Partial Result: U

Thanks

Dopamin2485

[blubbersuelze]

this Settings in Fritzbox are correct.

i use Firmware 6.50 upwards

have you tried it in command line?

what says Poller Cache for Fritzbox Device?
it should say something like this

Code: Select all

Script: /usr/bin/python /usr/share/cacti/site/scripts/fritzbox.py <fritzbox_ip> <password> traffic
RRD: <path to a RRD File>
Script: /usr/bin/python /usr/share/cacti/site/scripts/fritzbox.py <fritzbox_ip> <password> dslinfo
RRD: <path to a RRD File>

[Dopamin2485]

I'm so stupid

The Python script has another Filename.
Rename the script in fritzbox.py and everything is ok.

Thanks for your help.

Dopamin2485

[Dopamin2485]

There is only one error.

The inbound Traffic is not being displayed.
There is also NaN.

fritz_cacti.PNG (56.96 KiB) Viewed 10180 times

Everything else is fine.

Are there any Hints???

[blubbersuelze]

what says command line?

[Dopamin2485]

The Commandline says:

Code: Select all

python /var/www/html/cacti/scripts/fritzbox.py 192.168.178.1 ******* traffic
NewTotalBytesSent:5944805534 NewTotalBytesReceived:57053851174 NewTotalPacketsSent:14845013 NewTotalPacketsReceived:9426207

But the Graphs shows NaN

[blubbersuelze]

does the Data Template of "Fritzbox Traffic" look like this?

[Dopamin2485]

Yes it look like yours.

I also remove the graph and configure a new one but always the same.

[blubbersuelze]

Graph Template has Data Input correct associated?

Have you tried to delete Graph Template and Data Template for Traffic and readd them again?

This often solves this type of Problem

[Dopamin2485]

Thanks for your hint.

Now everything works.

Tanks

[sjs]

Hi!

First of all, thanks a lot to blubbersuelze for the effort.
However, these templates unfortunately don't work for me (Cacti v0.8.8b). When I'm trying to import the XML files, I keep getting an "Error: XML: Hash version does not exist." error with each XML file. Afterwards, the templates seem to show up in the appropriate template list, but are listed without any name.

Any ideas on how to solve this?


Regards,

Sebastian

[blubbersuelze]

i built it on Cacti 0.8.8g,
so you have to have at least this Version...

why don't update?
Especially to get all the security issues fixed ...