nmidDataExport plugin released

[optimuscream]

Hi Phalek.

I've made the change ,

But still not work. No difference.

Code: Select all

"Date","Inbound","Outbound"
"2015-05-29 07:35:00","",""
"2015-05-29 07:40:00","",""
"2015-05-29 07:45:00","",""
"2015-05-29 07:50:00","",""
"2015-05-29 07:55:00","",""
"2015-05-29 08:00:00","",""
"2015-05-29 08:05:00","",""
"2015-05-29 08:10:00","",""
"2015-05-29 08:15:00","",""
"2015-05-29 08:20:00","",""
"2015-05-29 08:25:00","",""
"2015-05-29 08:30:00","",""
"2015-05-29 08:35:00","",""

[optimuscream]

Hello Phalek ,

I'm using second method now.

the rrdtool daemon that fill up the cpu resources before turns out originated from built-in Cacti Settings (Graph Export) that I played before.
It eat a lot cpu resources until the unit non responsive. After I disabled it the system now running well.

It collecting the graph every 5 minutes with the time range one hour.
Now I have to make a script to merge all the 5 minutes files to one big files of one month data.

Thks.

[NaT1]

Hi

Any idea why I'm getting values every 2.5h exactly for graphs generated from same device while others from others are exporting just fine every less than 5min.
Ignore the values of the in/out, currently no traffic on this interface.

Code: Select all

"Date","Inbound","Outbound"
"2015-07-21 19:12:00","0.00","0.00"
"2015-07-21 21:36:00","243860.38","0.00"
"2015-07-22 00:00:00","534107.69","0.00"
"2015-07-22 02:24:00","606122.81","0.00"
"2015-07-22 04:48:00","678016.32","0.00"
"2015-07-22 07:12:00","639967.65","0.00"
"2015-07-22 09:36:00","666183.50","0.00"
"2015-07-22 12:00:00","642326.01","0.00"
"2015-07-22 14:24:00","0.00","0.00"
"2015-07-22 16:48:00","0.00","0.00"
"2015-07-22 19:12:00","0.00","0.00"
"2015-07-22 21:36:00","0.00","0.00"
"2015-07-23 00:00:00","0.00","0.00"
"2015-07-23 02:24:00","0.00","0.00"
"2015-07-23 04:48:00","0.00","0.00"

below that's a good one. Less than 5min sample

Code: Select all

"Date","Inbound","Outbound"
"2015-07-21 19:12:00","0.00","0.00"
"2015-07-21 19:16:30","0.00","0.00"
"2015-07-21 19:21:00","0.00","0.00"
"2015-07-21 19:25:30","0.00","0.00"
"2015-07-21 19:30:00","0.00","0.00"
"2015-07-21 19:34:30","0.00","0.00"
"2015-07-21 19:39:00","0.00","0.00"
"2015-07-21 19:43:30","0.00","0.00"
"2015-07-21 19:48:00","0.00","0.00"
"2015-07-21 19:52:30","0.00","0.00"
"2015-07-21 19:57:00","0.00","0.00"
"2015-07-21 20:01:30","0.00","0.00"
"2015-07-21 20:06:00","0.00","0.00"
"2015-07-21 20:10:30","0.00","0.00"
"2015-07-21 20:15:00","0.00","0.00"
"2015-07-21 20:19:30","0.00","0.00"
"2015-07-21 20:24:00","0.00","0.00"
"2015-07-21 20:28:30","0.00","0.00"
"2015-07-21 20:33:00","0.00","0.00"

I export interface graphs and tried already to delete the problematic graphs with the data sources as well , added it back but nothing seems to work.

Any clue ?

Thanks

[rovshango]

Hi Guys,

I am getting validation error after selecting Auto Export > Go.

Please give solution if you got this fixed.

Thanks

[phalek]

Hi

Try this: In cacti/site/include/csrf/csrf_magic.php put $GLOBALS['csrf']['defer'] = true;

[rovshango]

Hi

Try this: In cacti/site/include/csrf/csrf_magic.php put $GLOBALS['csrf']['defer'] = true;

Sorry but I couldn't locate cacti/site/include/csrf/csrf_magic.php file at all.

[phalek]

Search for it under your cacti install dir.

/path/to/cacti/include/csrf/csrf_magic.php

In CactiEZ it's here:

/var/www/html/include/csrf/csrf_magic.php

[rovshango]

Well, seems I missed some posts.
Cause I do not have even "csrf" directory.

[msantana]

Hi folks,

I'm ashamed to ask this question, but once a wise person told me a stupid question is the one you don't ask...

After installing the plugin, I use the process to create an automated report and nothing really happens. The attached file is a screenshot I get after clicking Go (after selecting a graph and selected "Automated Export - Add to Export"). Not sure if this is the correct response.

I noticed no file is generated in the export directory and I also check my cacti log file and notice the script does not generate a file.

03/30/2016 12:05:18 PM - nmidDataExport: Poller[0] Exported 0 file(s)
03/30/2016 12:10:17 PM - nmidDataExport: Poller[0] Exported 0 file(s)
03/30/2016 12:15:18 PM - nmidDataExport: Poller[0] Exported 0 file(s)
03/30/2016 12:20:17 PM - nmidDataExport: Poller[0] Exported 0 file(s)
03/30/2016 12:25:17 PM - nmidDataExport: Poller[0] Exported 0 file(s)

Has someone had a similar symptom? How can I solve this?

Thanks!

[msantana]

Managed to solve it. Somehow, the plugin was conflicting with the threshold plugin. After disabling and enabling the threshold plugin, the dataexport plugin began to generate the files.

[phalek]

Great to hear that. Btw. is threshold plugin = Thold ?

[msantana]

Correct. Regards

[torohuang]

Hi, I got the same problem, and I already disabling and enabling the threshold plugin, but still not working.
Someone can help me fix it?

[msantana]

Hi torohuang

I'm not an expert on this, try going to the Plugin Management section and make sure the NmidDataExport plugin is loaded before the Thold plugin. You'd have to click the "Load Order**" option, this provides you the ability to move the load order.

I hope this helps...

[msantana]

Hi folks.

This is a very old plugin but I hope someone can help me with a simple question.

I installed the plugin in the directory /var/www/html/cacti/plugins/nmidDataExport/export.

Within the export directory there's a file called index.html that contains the list of graphs that are using the plugin. This file may also reference any deleted graph that was not properly removed from the script. To properly remove the reference to
a graph one should the "Automate Export - Remove Graph(s)" option under the graph management.

How do I eliminate the reference the script is making to graphs that do not exist anymore? Is there a file or database that I can access to modify those references?

By the way, modifying the index.html doesn't fix the problem. This reference comes from another source within the script.

Thanks in advanced.

-Moises