Cannot graph V2 OID

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Developers, Moderators

Post Reply
tduchch
Posts: 2
Joined: Mon Nov 09, 2015 6:56 pm

Cannot graph V2 OID

Post by tduchch »

I am trying to setup a RSSI indicator for Cambium PMP450 on a Windows install of Cacti

The OID is: .1.3.6.1.4.1.161.19.3.2.2.8.0 v2 snmp

Net-SNMP snmpwalk gets the correct value, and I can also use snmp2_get from php and get the value, but cannot seem to be able to graph this value in cacti.

I am just using the SNMP - Generic OID Template

Ideas?
tduchch
Posts: 2
Joined: Mon Nov 09, 2015 6:56 pm

Re: Cannot graph V2 OID

Post by tduchch »

As a follow up, here are some log entries:

11/09/2015 05:21:10 PM - SPINE: Poller[0] Host[7] TH[1] DS[38] SNMP: v2: 10.50.3.95, dsname: snmp_oid, oid: .1.3.6.1.4.1.161.19.3.2.2.8.0, value: -53.2


11/09/2015 05:21:10 PM - POLLER: Poller[0] CACTI2RRD: c:/cacti/rrdtool.exe update C:\...\cacti\rra\bryce_d_home_snmp_oid_38.rrd --template snmp_oid 1447114866:-53.2

11/09/2015 05:23:04 PM - WEBLOG: Poller[0] CACTI2RRD: c:/cacti/rrdtool.exe graph - --imgformat=PNG --start="-86400" --end="-300" --title="Bryce D Home - RSSI" --base="1000" --height="120" --width="500" --alt-autoscale-max --lower-limit="0" --vertical-label="Level" --slope-mode --font TITLE:10: --font AXIS:7: --font LEGEND:8: --font UNIT:7: DEF:a="C\:/.../cacti/rra/bryce_d_home_snmp_oid_38.rrd":"snmp_oid":AVERAGE AREA:a#F5F800FF:"" GPRINT:a:LAST:"Current\:%8.2lf %s" GPRINT:a:AVERAGE:"Average\:%8.2lf %s" GPRINT:a:MAX:"Maximum\:%8.2lf %s\n"

Looks like it should be doing something?
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests