Overlib no picture in a graph
Moderators: Developers, Moderators
Overlib no picture in a graph
Hi,
I have just configured my first map. However, when I try to see pop up graph from the switches picture doesn't appear.
I have configured htmlstyle overlib as advised in manual...
I am running Cacti Version 0.8.8b and PHP Weathermap version 0.97a but it is the same with latest versions as well.
I have attached the screenshot.
This is driving me crazy any help would be much appreciated!
Cheers
I have just configured my first map. However, when I try to see pop up graph from the switches picture doesn't appear.
I have configured htmlstyle overlib as advised in manual...
I am running Cacti Version 0.8.8b and PHP Weathermap version 0.97a but it is the same with latest versions as well.
I have attached the screenshot.
This is driving me crazy any help would be much appreciated!
Cheers
- Attachments
-
- overlib.jpg (51.32 KiB) Viewed 2759 times
- Howie
- Cacti Guru User
- Posts: 5508
- Joined: Thu Sep 16, 2004 5:53 am
- Location: United Kingdom
- Contact:
Re: Overlib no picture in a graph
Perhaps you could share the config?
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Re: Overlib no picture in a graph
Thanks for the reply. I have just edited 2 nodes and link between them from example map. I have also noticed some font warnings in cacti log not sure if that is related:
10/14/2015 09:15:01 AM - WEATHERMAP: Poller[0] WARNING: [Map 1] hbdhb_map.conf: Using a non-existent special font (101) - falling back to internal GD fonts [WMWARN36]
10/14/2015 09:15:01 AM - WEATHERMAP: Poller[0] WARNING: [Map 1] hbdhb_map.conf: Failed to load ttf font ./Vera.ttf - at config line 20 [WMWARN30]
10/14/2015 09:15:01 AM - WEATHERMAP: Poller[0] WARNING: [Map 1] hbdhb_map.conf: Failed to load ttf font ./Vera.ttf - at config line 19 [WMWARN30]
10/14/2015 09:15:01 AM - WEATHERMAP: Poller[0] WARNING: [Map 1] hbdhb_map.conf: Failed to load ttf font ./VeraIt.ttf - at config line 18 [WMWARN30]
Here is the conf:
#
# some initial comments...
#
# This sample configuration file demonstrates most of the basic features of
# PHP Weathermap, along with some of the cosmetic and layout changes possible
#
# NOTE: to use this file as it stands, you need to keep it together with
# the relevant font, background and icon image files.
HTMLSTYLE overlib
BACKGROUND background.png
#HTMLOUTPUTFILE example.html
#IMAGEOUTPUTFILE example.png
TITLE Network Overview
KEYPOS 10 400
# define some new TrueType fonts - built-in ones go from 1 to 5, so start high
FONTDEFINE 100 ./VeraIt.ttf 8
FONTDEFINE 101 ./Vera.ttf 12
FONTDEFINE 102 ./Vera.ttf 9
KEYFONT 102
LINK DEFAULT
BANDWIDTH 1G
BWLABEL percent
BWFONT 100
OVERLIBWIDTH 395
OVERLIBHEIGHT 153
WIDTH 4
NODE DEFAULT
LABELFONT 101
NODE transit
POSITION 400 180
LABEL TRANSIT
# a little splash of background colour for these nodes
NODE isp1
POSITION 250 100
LABEL ISP1
INFOURL http://www.isp1.com/support/lookingglass.html
LABELBGCOLOR 255 224 224
NODE isp2
POSITION 550 100
LABEL ISP2
INFOURL http://www.isp2.net/portal/
LABELBGCOLOR 224 255 224
NODE HNBQ_D1
POSITION 400 300
LABEL HNBQ_D1
INFOURL https://HNBQ_D1.mynet.net/admin/
ICON /var/www/html/cacti/plugins/weathermap/configs/my_router.png
LABELOFFSET S
NODE HNBA_D1
LABEL HNBA_D1
POSITION 150 370
ICON /var/www/html/cacti/plugins/weathermap/configs/my_router.png
LABELOFFSET S
NODE customer2
LABEL ww.co.uk
POSITION 250 450
NODE infra
LABEL INFRASTRUCTURE
POSITION 450 450
# this node has an icon, and so we push the label to the South edge of it, so it
# can still be read
NODE sync
LABEL Sync
ICON my_router.png
LABELOFFSET S
LABELFONT 2
POSITION 550 370
# the icon is taken from a Nagios icon pack:
# http://www.nagiosexchange.org/Image_Pac ... e]=10%3A10
NODE site1
LABEL site1
POSITION 700 220
NODE site2
LABEL site2
POSITION 750 420
LINK sync-HNBQ_D1
NODES sync HNBQ_D1
TARGET data/sync_traffic_in_259.rrd
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=256
#
# Site1 has two E1s, so we use NODE-offsets to allow them to run parallel
#
LINK sync-site1a
NODES sync:N site1:W
WIDTH 3
TARGET data/sync_traffic_in_257.rrd
BANDWIDTH 2M
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... aph_width=
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=126
LINK sync-site1b
NODES sync:E site1:SE
WIDTH 3
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... aph_width=
TARGET data/sync_traffic_in_258.rrd
BANDWIDTH 2M
INFOURL http://support.mynet.net/cacti/graph.ph ... raph_id=56
#
# site2 also has two links, but this time we use the VIA to curve the links
#
LINK sync-site2a
NODES sync site2
WIDTH 3
VIA 650 380
TARGET data/sync_traffic_in_251.rrd
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
BANDWIDTH 1M
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=252
LINK sync-site2b
NODES sync site2
WIDTH 3
VIA 650 420
TARGET data/sync_traffic_in_252.rrd
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
BANDWIDTH 1M
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=561
#
# ISP 1 has a several links, again, but they prefer to see one arrow, and the aggregate bandwidth
# so we use multiple TARGETs on one line, here, to sum the data
LINK transit-isp1
NODES transit isp1
TARGET data/trans1_traffic_in_352.rrd data/trans1_traffic_in_378.rrd data/trans1_traffic_in_420.rrd
BANDWIDTH 10M
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... aph_width=
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=633
LINK transit-isp2
NODES transit isp2
TARGET data/trans1_traffic_in_438.rrd
BANDWIDTH 34M
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=265
LINK HNBQ_D1-transit
NODES transit HNBQ_D1
TARGET data/trans1_traffic_in_350.rrd
ARROWSTYLE compact
WIDTH 4
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=122
LINK HNBA_D1-HNBQ_D1
NODES HNBA_D1 HNBQ_D1
BANDWIDTH 1G
TARGET /var/www/html/cacti/rra/hnba_d1_traffic_in_11.rrd
OVERLIBGRAPH http://10.168.9.50/cacti/graph.php?acti ... 1444602036
INFOURL http://10.168.9.50/cacti/graph.php?acti ... 1444615569
LINK cust2-HNBQ_D1
NODES customer2 HNBQ_D1
TARGET data/extreme_traffic_in_286.rrd
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=222
LINK infra-HNBQ_D1
NODES infra HNBQ_D1
TARGET data/extreme_traffic_in_294.rrd
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=228
10/14/2015 09:15:01 AM - WEATHERMAP: Poller[0] WARNING: [Map 1] hbdhb_map.conf: Using a non-existent special font (101) - falling back to internal GD fonts [WMWARN36]
10/14/2015 09:15:01 AM - WEATHERMAP: Poller[0] WARNING: [Map 1] hbdhb_map.conf: Failed to load ttf font ./Vera.ttf - at config line 20 [WMWARN30]
10/14/2015 09:15:01 AM - WEATHERMAP: Poller[0] WARNING: [Map 1] hbdhb_map.conf: Failed to load ttf font ./Vera.ttf - at config line 19 [WMWARN30]
10/14/2015 09:15:01 AM - WEATHERMAP: Poller[0] WARNING: [Map 1] hbdhb_map.conf: Failed to load ttf font ./VeraIt.ttf - at config line 18 [WMWARN30]
Here is the conf:
#
# some initial comments...
#
# This sample configuration file demonstrates most of the basic features of
# PHP Weathermap, along with some of the cosmetic and layout changes possible
#
# NOTE: to use this file as it stands, you need to keep it together with
# the relevant font, background and icon image files.
HTMLSTYLE overlib
BACKGROUND background.png
#HTMLOUTPUTFILE example.html
#IMAGEOUTPUTFILE example.png
TITLE Network Overview
KEYPOS 10 400
# define some new TrueType fonts - built-in ones go from 1 to 5, so start high
FONTDEFINE 100 ./VeraIt.ttf 8
FONTDEFINE 101 ./Vera.ttf 12
FONTDEFINE 102 ./Vera.ttf 9
KEYFONT 102
LINK DEFAULT
BANDWIDTH 1G
BWLABEL percent
BWFONT 100
OVERLIBWIDTH 395
OVERLIBHEIGHT 153
WIDTH 4
NODE DEFAULT
LABELFONT 101
NODE transit
POSITION 400 180
LABEL TRANSIT
# a little splash of background colour for these nodes
NODE isp1
POSITION 250 100
LABEL ISP1
INFOURL http://www.isp1.com/support/lookingglass.html
LABELBGCOLOR 255 224 224
NODE isp2
POSITION 550 100
LABEL ISP2
INFOURL http://www.isp2.net/portal/
LABELBGCOLOR 224 255 224
NODE HNBQ_D1
POSITION 400 300
LABEL HNBQ_D1
INFOURL https://HNBQ_D1.mynet.net/admin/
ICON /var/www/html/cacti/plugins/weathermap/configs/my_router.png
LABELOFFSET S
NODE HNBA_D1
LABEL HNBA_D1
POSITION 150 370
ICON /var/www/html/cacti/plugins/weathermap/configs/my_router.png
LABELOFFSET S
NODE customer2
LABEL ww.co.uk
POSITION 250 450
NODE infra
LABEL INFRASTRUCTURE
POSITION 450 450
# this node has an icon, and so we push the label to the South edge of it, so it
# can still be read
NODE sync
LABEL Sync
ICON my_router.png
LABELOFFSET S
LABELFONT 2
POSITION 550 370
# the icon is taken from a Nagios icon pack:
# http://www.nagiosexchange.org/Image_Pac ... e]=10%3A10
NODE site1
LABEL site1
POSITION 700 220
NODE site2
LABEL site2
POSITION 750 420
LINK sync-HNBQ_D1
NODES sync HNBQ_D1
TARGET data/sync_traffic_in_259.rrd
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=256
#
# Site1 has two E1s, so we use NODE-offsets to allow them to run parallel
#
LINK sync-site1a
NODES sync:N site1:W
WIDTH 3
TARGET data/sync_traffic_in_257.rrd
BANDWIDTH 2M
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... aph_width=
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=126
LINK sync-site1b
NODES sync:E site1:SE
WIDTH 3
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... aph_width=
TARGET data/sync_traffic_in_258.rrd
BANDWIDTH 2M
INFOURL http://support.mynet.net/cacti/graph.ph ... raph_id=56
#
# site2 also has two links, but this time we use the VIA to curve the links
#
LINK sync-site2a
NODES sync site2
WIDTH 3
VIA 650 380
TARGET data/sync_traffic_in_251.rrd
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
BANDWIDTH 1M
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=252
LINK sync-site2b
NODES sync site2
WIDTH 3
VIA 650 420
TARGET data/sync_traffic_in_252.rrd
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
BANDWIDTH 1M
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=561
#
# ISP 1 has a several links, again, but they prefer to see one arrow, and the aggregate bandwidth
# so we use multiple TARGETs on one line, here, to sum the data
LINK transit-isp1
NODES transit isp1
TARGET data/trans1_traffic_in_352.rrd data/trans1_traffic_in_378.rrd data/trans1_traffic_in_420.rrd
BANDWIDTH 10M
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... aph_width=
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=633
LINK transit-isp2
NODES transit isp2
TARGET data/trans1_traffic_in_438.rrd
BANDWIDTH 34M
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=265
LINK HNBQ_D1-transit
NODES transit HNBQ_D1
TARGET data/trans1_traffic_in_350.rrd
ARROWSTYLE compact
WIDTH 4
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=122
LINK HNBA_D1-HNBQ_D1
NODES HNBA_D1 HNBQ_D1
BANDWIDTH 1G
TARGET /var/www/html/cacti/rra/hnba_d1_traffic_in_11.rrd
OVERLIBGRAPH http://10.168.9.50/cacti/graph.php?acti ... 1444602036
INFOURL http://10.168.9.50/cacti/graph.php?acti ... 1444615569
LINK cust2-HNBQ_D1
NODES customer2 HNBQ_D1
TARGET data/extreme_traffic_in_286.rrd
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=222
LINK infra-HNBQ_D1
NODES infra HNBQ_D1
TARGET data/extreme_traffic_in_294.rrd
OVERLIBGRAPH http://support.mynet.net/cacti/graph_im ... _width=300
INFOURL http://support.mynet.net/cacti/graph.ph ... aph_id=228
- Howie
- Cacti Guru User
- Posts: 5508
- Joined: Thu Sep 16, 2004 5:53 am
- Location: United Kingdom
- Contact:
Re: Overlib no picture in a graph
Code: Select all
http://10.168.9.50/cacti/graph.php?action=zoom&local_graph_id=5&rra_id=0&view_type=tree&graph_start=1444558836&graph_end=1444602036
Pretty sure the image URL has graph_image.php in it... right-click on the graph in Cacti to get that URL.
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Re: Overlib no picture in a graph
Than you so much Howie! You made my day! It finally works
Re: Overlib no picture in a graph
Hi again,
It turned out that what I set doesn't work well. I managed to get graph but it doesn't change. If you look at screenshot you will notice that time on the graph is 15:58:19 although it is 21:15 at the moment. At 15:58 I changed OVERLIBGRAPH link.
I tried to put: http://10.168.9.50/cacti/graph_image.ph ... 1444791499
and
/cacti/graph_image.php?action=properties&local_graph_id=8&rra_id=0&graph_start=1444705099&graph_end=1444791499
but apparently it always shows the same graph.
Anybody knows how to get the right link for OVERLIBGRAPH?
Thanks
It turned out that what I set doesn't work well. I managed to get graph but it doesn't change. If you look at screenshot you will notice that time on the graph is 15:58:19 although it is 21:15 at the moment. At 15:58 I changed OVERLIBGRAPH link.
I tried to put: http://10.168.9.50/cacti/graph_image.ph ... 1444791499
and
/cacti/graph_image.php?action=properties&local_graph_id=8&rra_id=0&graph_start=1444705099&graph_end=1444791499
but apparently it always shows the same graph.
Anybody knows how to get the right link for OVERLIBGRAPH?
Thanks
- Attachments
-
- Overlib.jpg (195.8 KiB) Viewed 2692 times
- Howie
- Cacti Guru User
- Posts: 5508
- Joined: Thu Sep 16, 2004 5:53 am
- Location: United Kingdom
- Contact:
Re: Overlib no picture in a graph
Remove the parts from the end that say graph_start and graph_end - those are a fixed time.
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Re: Overlib no picture in a graph
All good now. Thanks again
Who is online
Users browsing this forum: No registered users and 5 guests