Ubiquiti AirOS7 AC 7.1.3 AP PTP/PTMP and Station Template

[redpeppers01]

I have created the following template for the AirOS7 AC AP PTP/PTMP, and Station Template - Cacti v0.8.8e.

Please let me know if you notice any bugs and/or have any recommendations.

Includes:

CPU
Uptime
Advanced Ping
Interface Status
Noise Floor
Frequency
Channel Width
TX Power
County Code
Ethernet Stats
TX/RX Rates in PHY (AP PTP and Station Only)
Station Count (AP PTMP Only)

[redpeppers01]

.....Screenshots

[stoneii]

Hi, Thank You!
I use AF24 FW 2.2.1 Cacti 0.8.8.f and something does not go.
I use AF24 FW 2.2.1 Cacti 0.8.8.c and Template does not go.
I use AF24 FW 2.2.1 Cacti 0.8.8.e and Template does not go.
or you need more?

Sorry

[redpeppers01]

Version e should work and i will need more description of the actual problem.

[stoneii]

Your Template not runn on Ubiquiti AirOS7 AC v7.1.4 (XC) AP PTP/PTMP
Can you update the template v7.1.3 is not Support is old FW.

Thanks

[stoneii]

Your Template mit run on cacti and new FW on UBNT AC devices!!!!

[redpeppers01]

It works fine with latest release. I am using it with no problems.

[stoneii]

We are sorry but unfortunately it does not go , I pulled up my system of cacti - 0.8.8a to cacti - 0.8.8e and their template instaliert but come no values ​​. as they have the device made ​​config ?
it is templated by many the only thing that does not work!
What do you need from me that they can look at it

[stoneii]

Your Template not runn on Ubiquiti AirOS7 AC AP PTP/PTMP
Close the Post

[redpeppers01]

Your Template not runn on Ubiquiti AirOS7 AC AP PTP/PTMP
Close the Post

I am using this template on multiple cacti servers and multiple devices running V7.1.4+. I know multiple other users that are also using this template. You need to do some debugging on your cacti server before blaming the template. Its a very simple template which is built with no scripting and is very easy to debug. I can not help you because you provide no error details except for that it does not work.

[epicfail]

So I am able to use this template pretty successfully on AirOS 7 v.7.2.4 (WA), however I am modifying the TX/RX rate to show the capacity of the link, as I measure throughput on the end router interfaces, however it is stuck in showing as k instead of M, any idea on how to fix this?

[redpeppers01]

So I am able to use this template pretty successfully on AirOS 7 v.7.2.4 (WA), however I am modifying the TX/RX rate to show the capacity of the link, as I measure throughput on the end router interfaces, however it is stuck in showing as k instead of M, any idea on how to fix this?

What OID are you using? When I built the template I could not find a OID that measured the link capacity. You could build a CDEF for the graph under graph management and then modify the graph template to use the CDEF.

[epicfail]

My mistake, it starts with .1.3.6.1.4.1.41112.1.4.7.1.17 , but the end OID is different for different radios. I jumped the gun, still researching.

[epicfail]

Now I need to figure out how implement a sort of wildcard for the OID after .1.3.6.1.4.1.41112.1.4.7.1.17

[Lewis]

hello,
is there any hope to upgrade this template, to work with Airos 8 ?