Problems on threshold type - baseline deviation

Support questions about the Threshold plugin

Moderators: Developers, Moderators

Post Reply
ethanwong
Posts: 1
Joined: Sat Mar 07, 2015 11:02 am

Problems on threshold type - baseline deviation

Post by ethanwong »

I have cacti 0.8.8 with threshold 0.49. I chose baseline deviation threshold type with +/- 10% and it will be triggered once the poller value fall out of the baseline up% or baseline down% range. Of course, an alert email will be sent to the defined notification list accordingly.

My problem is: once the poller value returned to normal(fall back within the range) after the alert, NO restoration email are sent. I have checked I haven't disable my restoration email setting in the threshold setting page. Do baseline alarm will be performed differently than the usual alert? Please help..... :( :( :( .......URGENT. Thank you.
sudoritz
Posts: 8
Joined: Thu Oct 16, 2014 12:23 pm

Re: Problems on threshold type - baseline deviation

Post by sudoritz »

Im dealing with the same issues.


Since i look at traffic levels which shifts sporadically throughout the day due to User traffic levels in like a wave format where at night its 400mb and during the day its 2GB (and need Start from the first deviation % at if its.

2GB and drops to 1.5GB (alert) and Keep alerting until it climbs back up and also send the restoration email.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests