[SOLVED] Allow |query_ifSpeed| for upper limit

[ariesgeek]

If |query_ifSpeed| is used as the upper limit on a graph, it is not replaced with the appropriate number, rather the following error is given:

Code: Select all

CMDPHP: Poller[0] ERROR: SQL Exec Failed "update graph_templates_graph set Upper Limit='|query_ifSpeed|' where local_graph_id=5"

[rony]

What happens if the upper limit changes when the device is re-quered?

It's not a simple answer, hence we haven't implemented it yet.

[ariesgeek]

Aha! I see your point. Thanks for explaining. I just assumed it was an oversight.

[rony]

Btw, I must admit I like the idea...

Just hard to track it, and do you update the data source as well? If so, we need to update the rrdtool file, which currently does not happen.

[ariesgeek]

Btw, I must admit I like the idea...

Just hard to track it, and do you update the data source as well? If so, we need to update the rrdtool file, which currently does not happen.

Ok, since you're interested, let's think about this.

So, we allow |query_ifSpeed| as an upper limit. We add a second option, a checkbox, "Upper Limit Never Changes". If checked, that addresses all the above and we ignore a new upper limit if it changes. There are practical reasons for this.

If that box is unchecked, then we will have a few choices.

1) If the ifSpeed decreases, we may want to consider keeping upper limit where it is for historical graphing purposes. We can give the user this option somewhere in a configuration.
2) If the ifSpeed increases, we can increase the upper limit. Yeah, you'd have to change it in the RRD. It's been a while so I'm not sure if this can be done or not. If not, your workaround is to dump to XML, make changes to the XML file, then pull your XML file into a "new" RRD. I used to have an algorithm to accomplish the above, albeit in perl, but it's long-gone. It's simple enough to do though.
3) Maybe go a step further and note that if the ifSpeed changes X times in Y amount of time (3 changes in 2 months maybe), we just dump the upper limit altogether. Of course, make this user-configurable.

I dunno, I'm just thinking of things off the top of my head at this point.

[gandalf]

Support for |query_*| variables for upper/lower limit is impleneted in SVN. Targeted release is 088. Awaiting code verification
Reinhard

[deu439356]

gandalf,

Support for |query_*| variables for upper/lower limit is impleneted in SVN. Targeted release is 088.

I would like to be able to use the |query_ifSpeed| for my upper limit, do you know when 8.8 will be released? Or do you know of a way to do this in 8.7b?

Thanks!

[gandalf]

expect 088 in the first half of this year (btw: Happy New Year to all of you!), at least as a beta. If I remember correctly, backporting would be time cinsuming. It is not planned for 087c
Reinhard

[llow]

I made a patch for 0.8.7 beta 4 a while ago that I am still using today. If you can't wait for 0.8.8.

http://bugs.cacti.net/view.php?id=1030

[deu439356]

I made a patch for 0.8.7 beta 4 a while ago that I am still using today. If you can't wait for 0.8.8.

Thank you! I am very excited to try this out. I should have some time within the next week to apply it.

B

[tcprado]

graph_image.png (8.22 KiB) Viewed 7296 times

Capturar.PNG (36.23 KiB) Viewed 7296 times

So, ifSpeed is detected correctly, but when using it as upper limit, I just get 1 on the graph.

[tcprado]

RRDTool Command:
C:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Switch 9-6 - Traffic - GigabitEthernet1/0/1" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--upper-limit="|query_ifSpeed|" \
--lower-limit="0" \
--vertical-label="bits per second" \
--slope-mode \
--font TITLE:10: \
--font AXIS:7: \
--font LEGEND:8: \
--font UNIT:7: \
DEF:a="C\:/inetpub/wwwroot/cacti/rra/108/3925.rrd":"traffic_in":MAX \
DEF:b="C\:/inetpub/wwwroot/cacti/rra/108/3925.rrd":"traffic_out":MAX \
CDEF:cdefa="a,8,*" \
CDEF:cdefe="b,8,*" \
AREA:cdefa#00CF00FF:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97FF:"Outbound" \
GPRINT:cdefe:LAST:"Current\:%8.2lf %s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s\n"
RRDTool Says: