snmp error

[AlexMikhailovskiy]

Hi.
I installed cacti 0.8.7i
I added microwave Ericsson, and this device is working correctly,
after them i tried added microwave Huawei, but cacti show:
SNMP Information
SNMP error
Ping Results
ICMP Ping Success (7.803 ms)


I run from the command line command snmpwalk -v 2c .... and microwave Huawei is responding.
I can not understand, what is wrong i configured.
Can anybody help me?

P.S. sorry for my bad English...

[BSOD2600]

If you just installed, then upgrade to 0.8.8c which is the current release.

if you snmpwalk the system mib, does it respond?
Try having cacti use snmpv1?
try lowering the number of OIDs per request?

[AlexMikhailovskiy]

You know i installed cacti in the april of 2014, and now in cacti about 2500 devices

if you snmpwalk the system mib, does it respond?

Unfortunately I don`t understand the question, what should I do?

Try having cacti use snmpv1?

yes i tried, but result is the same

SNMP Information
SNMP error
Ping Results
ICMP Ping Success (7.801 ms)

try lowering the number of OIDs per request?

yes i changed value from 100 till 20, but result is the same

SNMP Information
SNMP error
Ping Results
ICMP Ping Success (7.838 ms)
____________________________
Alex

[BSOD2600]

Where did you obtain such an outdated version of Cacti from?

From the cacti server, run the following against the problem device. Do you get a response?

Code: Select all

snmpwalk -v 1 -c public IPADDRESS .1.3.6.1.2.1.1

[AlexMikhailovskiy]

From the cacti server, run the following against the problem device. Do you get a response?

snmpwalk -v 1 -c public IPADDRESS .1.3.6.1.2.1.1


Yes i am getting response from problem device.