where to get default templates?

[Chrysalis]

I imported a template which then proceeded to update various existing templates. All the ones that say update obviously should not have been changed.

Am I screwed (assuming this breaks existing functions) or is there a way to get those back to default.

Cacti has imported the following items:

CDEF
[success] Total All Data Sources [update]
[success] Multiply by 1024 [update]
[success] Change per 5 mins to per hour [new]
[success] Turn Bytes into Bits [update]
[success] Total All Data Sources, Multiply by 1024 [update]

GPRINT Preset
[success] Normal [update]
[success] Load Average [update]

Data Input Method
[success] Get SNMP Data [update]
[success] Get SNMP Data (Indexed) [update]
[success] Get Script Server Data (Indexed) [update]

Data Template
[success] ucd/net - CPU Usage - System [update]
[success] ucd/net - CPU Usage - User [update]
[success] ucd/net - CPU Usage - Nice [update]
[success] ucd/net - Load Average - 1 Minute [update]
[success] ucd/net - Load Average - 5 Minute [update]
[success] ucd/net - Load Average - 15 Minute [update]
[success] ucd/net - Memory - Buffers [update]
[success] ucd/net - Memory - Free [update]
[success] ucd/net - Memory - Cache [update]
[success] Exim Local Mail In [new]
[success] Exim Local Mail Out [new]
[success] Exim External Mail In [new]
[success] Exim External Mail Out [new]
[success] Exim Viruses Detected [new]
[success] Exim Spam Detected [new]
[success] Exim Queue Length [new]
[success] Exim Queue Bounces [new]
[success] Exim Queued for our site [new]
[success] Interface - Traffic [update]
[success] Interface - Errors/Discards [update]
[success] Interface - Unicast Packets [update]
[success] Interface - Non-Unicast Packets [update]
[success] ucd/net - Hard Drive Space [update]
[success] Host MIB - Hard Drive Space [update]

Graph Template
[success] ucd/net - CPU Usage [update]
[success] ucd/net - Load Average [update]
[success] ucd/net - Memory Usage [update]
[success] Exim Local Mail Traffic [new]
[success] Exim External Mail Traffic [new]
[success] Exim Nasties [new]
[success] Exim Queue [new]
[success] Interface - Traffic (bits/sec) [update]
[success] Interface - Errors/Discards [update]
[success] Interface - Unicast Packets [update]
[success] Interface - Non-Unicast Packets [update]
[success] Interface - Traffic (bytes/sec) [update]
[success] Interface - Traffic (bits/sec, 95th Percentile) [update]
[success] Interface - Traffic (bits/sec, Total Bandwidth) [update]
[success] Interface - Traffic (bytes/sec, Total Bandwidth) [update]
[success] ucd/net - Available Disk Space [update]
[success] Host MIB - Available Disk Space [update]

Data Query
[success] SNMP - Interface Statistics [update]
[success] ucd/net - Get Monitored Partitions [update]
[success] SNMP - Get Mounted Partitions [update]

Host Template
[success] ucd/net SNMP Exim Mailer [new]

ok I have exported from a new cacti the data queries, graphs and data templates (not yet imported), but there seems to be no way to get the other stuff.

[lizard1]

Hello,

I have the same problem.

I have just imported the Cisco IP SLA template (http://forums.cacti.net/about19542.html)
and cacti gives the following information:

Code: Select all

CDEF
[success] Make Stack Negative [update]

[success] Divide by 100 [new]
[success] Multiply by 1000 [new]
[success] Cisco SAA - Stddev +SD Jitter [new]
[success] Cisco SAA - Mean +SD Jitter [new]
[success] Cisco SAA - Mean -SD Jitter [new]
[success] Cisco SAA - Mean +DS Jitter [new]
[success] Cisco SAA - Mean -DS Jitter [new]
[success] Cisco SAA - Stddev -SD Jitter [new]
[success] Cisco SAA - Stddev +DS Jitter [new]
[success] Cisco SAA - Stddev -DS Jitter [new]


GPRINT Preset
[success] Normal [update]


Data Input Method
[success] Get SNMP Data (Indexed) [update]

Data Template
[success] Cisco Router - SAA [new]

Graph Template
[success] Cisco - SAA Jitter/Error Statistics [new]
[success] Cisco - SAA Jitter Statistics [new]
[success] Cisco - SAA Basic Statistics [new]
[success] Cisco - SAA HTTP Statistics [new]
[success] Cisco - SAA VoIP Score [new]
[success] Cisco - SAA Jitter Statistics (Micro Precision) [new]
[success] Cisco - SAA Jitter/Error Statistics (Micro Precision) [new]
[success] Cisco - SAA DNS Statistics [new]
[success] Cisco - SAA FTP Statistics [new]
[success] Cisco - SAA Jitter Dispersion [new]

Data Query
[success] Cisco - IP SLA Statistics [new]

So it seems, the following things are overwritten:

CDEF
[success] Make Stack Negative [update]
(I couldn't see a change, probably because I never changed the defaults)

GPRINT Preset
[success] Normal [update]
(This one has been changed back to default, was changed by me beforehand.)

Data Input Method
[success] Get SNMP Data (Indexed) [update]

This is where I don't know how to check if something has changed, because I can't find the Data Input Method
"Get SNMP Data (indexed)" under "Data Input Methods" on the webinterface.

How do I make sure that nothing has changed?


best regards

[thebigf]

I'd like to know if this is possible by loading a default table into another DB, I've inadvertently overwritten:

Host MIB - CPU Utilization
Host MIB - Hard Drive Space

If you guys would like a non-technical fix, I'll trade you exported default templates.

Jamie

[Struz]

I'd like to know if this is possible by loading a default table into another DB, I've inadvertently overwritten:

Host MIB - CPU Utilization
Host MIB - Hard Drive Space

If you guys would like a non-technical fix, I'll trade you exported default templates.

Jamie

I've encountered a simliar issue, perhaps you could export the templates for Host MIB - CPU Utilization and Host MIB - Hard Drive Space?

Dan

[patricr]

Hello,

Unable to found any template for exim mail queue, which will work on cPanel server.

Please give me link if you find any.

Regards,
Patrick