Microsoft IIS current connection template

[chaachee]

Note that the IIS - cur. connections data template has hardcoded public as the snmp community. If you use a different community name, you may have issues until you remove this from the data template.

[markokobal]

Nice template, but I guess some more information about IIS status could be retreived. Are you planing to add some more graph templates for IIS?

[apperrault]

I use the scripts located here to gather info on my IIS server.

http://forums.cacti.net/about12464.html

Hope that helps

app[/url]

[dagonet]

Nice template, but I guess some more information about IIS status could be retreived. Are you planing to add some more graph templates for IIS?

Hi Markokobal,
you may have a look at the HTTPSERVER-MIB and decide what ever you are interested in graphing.

Unfortunately I have no more access IIS6 machine. But I do remember that the INTERNETSERVER-MIB did not work.

Regards,
dagonet

[Volund]

If you update the data source min/max values in cacti, you must manually update the rrd file(s) with the rrdtool tune command.

Hi,

I made an update of the data source min/max value in cacti and an update with rrdtool tune but.........do I do make changes for all servers using this data source or only modify one by the rrdtool tune command?

exemple that I made:
sudo rrdtool tune /var/lib/cacti/rra/server_1_snmp_oid_1519.rrd --maximum snmp_oid:10000

do I do make this for the server_2_snmp_oid and the server_3_snmp_oid?

[peecee]

These four xml files don't seem to work for any of my IIS-enabled servers. Do I need to do anything to the templates to make them work with Cacti 0.8.7b?

[bei01]

Does this template no longer work with 0.8.7b? On a fresh install of this cacti version, I am not getting any data in my graphs, and the poller is showing an error for this:

03/07/2008 08:15:05 AM - CMDPHP: Poller[0] Host[3] DS[23] WARNING: Result from SNMP not valid. Partial Result:
The Data Source Debug shows:

/usr/bin/rrdtool create \
/var/www/cacti/rra/IIS.rrd \
--step 300 \
DS:snmp_oid:GAUGE:600:0:1000 \
RRA:AVERAGE:0.5:1:500 \
RRA:AVERAGE:0.5:1:600 \
RRA:AVERAGE:0.5:6:700 \
RRA:AVERAGE:0.5:24:775 \
RRA:AVERAGE:0.5:288:797 \
RRA:MAX:0.5:1:500 \
RRA:MAX:0.5:1:600 \
RRA:MAX:0.5:6:700 \
RRA:MAX:0.5:24:775 \
RRA:MAX:0.5:288:797 \

But, I notice on our old cacti box (0.8.6g, getting replaced by this new one I am building), this is working fine, and and the Data Source Debug on it is showing much more:

/usr/bin/rrdtool create \
/home/www/htdocs/cacti/rra/IIS.rrd \
--step 300 \
DS:snmp_oid:GAUGE:600:0:1000 \
RRA:AVERAGE:0.5:1:600 \
RRA:AVERAGE:0.5:6:700 \
RRA:AVERAGE:0.5:24:775 \
RRA:AVERAGE:0.5:288:797 \
RRA:MIN:0.5:1:600 \
RRA:MIN:0.5:6:700 \
RRA:MIN:0.5:24:775 \
RRA:MIN:0.5:288:797 \
RRA:MAX:0.5:1:600 \
RRA:MAX:0.5:6:700 \
RRA:MAX:0.5:24:775 \
RRA:MAX:0.5:288:797 \
RRA:LAST:0.5:1:600 \
RRA:LAST:0.5:6:700 \
RRA:LAST:0.5:24:775 \
RRA:LAST:0.5:288:797 \

Any Ideas on how to get this working on 0.8.7b?

[jpipitone]

I had the same problem - here's what I did to correct:

I went into the data templates option in Cacti, and selected "IIS - cur. connections"

The only value I have filled in is the OID, everything else is blank. The value that was causing an issue was the SNMP community - by default this is set to public, our community name was different.

As soon as I took it out, the graphs started working.

Hope this helps

[ivanovis81]

Hi all,
this is what graph write as HTTP Connections for one of my servers.


but, this i what I receive after this command in cmd on the same server.

C:\Users\user003>netstat -ano | find /i /c ":80"
2410

Only I think something is not OK?

[cigamit]

Your graph is in connections per second (so connection / 5 / 60), the data in the script is showing current total connections. If you want to display the actual connections, you should create a CDEF that multiples the datasource by 300.