Cisco Catalyst 4500 don't Showing IP Address

Support questions about the MAC Track plugin

Moderators: Developers, Moderators

Post Reply
joseaugusto
Posts: 1
Joined: Thu Aug 28, 2014 7:08 pm

Cisco Catalyst 4500 don't Showing IP Address

Post by joseaugusto »

Hi, I just deployed this fantastic plugin, but its don't work perfectly...

I insert my access switches Cisco Cat 4500, the mac address showing correctly, but not showing IP Addressing.

Follow my screen shots.

Thank you.
Attachments
Screen Shot 2014-08-28 at 9.22.15 PM.png
Screen Shot 2014-08-28 at 9.22.15 PM.png (162.9 KiB) Viewed 2294 times
Screen Shot 2014-08-28 at 9.22.03 PM.png
Screen Shot 2014-08-28 at 9.22.03 PM.png (56.03 KiB) Viewed 2294 times
Screen Shot 2014-08-28 at 9.21.49 PM.png
Screen Shot 2014-08-28 at 9.21.49 PM.png (25.47 KiB) Viewed 2294 times
Screen Shot 2014-08-28 at 9.14.37 PM.png
Screen Shot 2014-08-28 at 9.14.37 PM.png (119.2 KiB) Viewed 2294 times
Screen Shot 2014-08-28 at 9.14.18 PM.png
Screen Shot 2014-08-28 at 9.14.18 PM.png (23.85 KiB) Viewed 2294 times
Top
tommyj
Posts: 43
Joined: Thu Jun 23, 2005 5:16 pm
Location: Stockholm, Sweden

Re: Cisco Catalyst 4500 don't Showing IP Address

Post by tommyj »

Do you have your router added? Is the router one of the 4500's? The router (containing the arp table) should be configured as a Switch/Router or Router (depending on what you have) under Device Types I guess
Top
Post Reply

Return to “Plugin: (MAC Track)”

Who is online

Users browsing this forum: No registered users and 1 guest