Sorry this took me so long to get back to. I had to attend a conference in which I was unable to work on the weathermap for almost a week. I got back today and have noticed that the graphs are still not working correctly. I have tried to create new ones and wait, but still have no data on the graphs I have created. I am pretty sure that I just do not know how to correctly configure the graphs so that they work properly and can report to the weathermap.
If you could let me know how I would go about setting up a graph for a switch that I have created as a device in cacti so that it can pull information for the weathermap, I would apprecaite it!
Installing Weathermap Plugin (First Time Installation)
Moderators: Developers, Moderators
-
EpicRiddle
- Posts: 9
- Joined: Fri Jun 13, 2014 9:39 am
-
Howie
- Cacti Guru User
- Posts: 5508
- Joined: Thu Sep 16, 2004 5:53 am
- Location: United Kingdom
- Contact:
Re: Installing Weathermap Plugin (First Time Installation)
OK, well that's Cacti 101, so I would refer you to the manual, and the troubleshooting section of the manual as a good start if it isn't working. Gandalf's troubleshooting section is good!
Once you have .rrd files and graphs then come back to the Weathermap side of things. You are on the right track with that though, once you get the data.
Once you have .rrd files and graphs then come back to the Weathermap side of things. You are on the right track with that though, once you get the data.
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Who is online
Users browsing this forum: No registered users and 3 guests