How to link Device to Device Type?

Support questions about the MAC Track plugin

Moderators: Developers, Moderators

Post Reply
rgtobr
Posts: 3
Joined: Wed Jun 18, 2014 7:56 am

How to link Device to Device Type?

Post by rgtobr »

How can I link my Device (Console > Device Tracking > Devices > "Any Device") to any Device Type (Console > Device Tracking > Device Types > "Any device type").

Why I asking it? After instaled MACTRACK here, my Device Types was empty. Than, I created one item to test; another time I created more one... And always during tests I was receiving the message:

Code: Select all

SIMDEBUG: WARNING: SITE: HMCP, IP: 10.0.30.10, TYPE: 3Com SuperStack 3 Switch 4500 26-Port So, ERROR: Device Type Not Found in Device Type Table.
I analysed line by line from mactrack_scanner.php and lib/mactrack_functions.php, and too into tables mac_track_devices and mac_track_device_types. During analysis, I observed the mac_track_devices.device_type_id always 0. And my "device type" tests, always changing values of mac_track_device_types.device_type_id. At end, I changed mac_track_devices.device_type_id from my device to same last value of mac_track_device_types.device_type_id that I created, and my problem solved! But I didn't find where I link my Device to any Device Type.
rgtobr
Posts: 3
Joined: Wed Jun 18, 2014 7:56 am

Re: How to link Device to Device Type?

Post by rgtobr »

I solved. When my Device Type are with correct parameters, it does the link automatic. Sorry.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests