Unix - Ping Latency: graph does not show?

[cacuser]

Hello Everyone

Everything is running good, but Unix - Ping Latency: graph does not show.

I enabled debug and did not see any errors.

Hope someone can help me out the problem

Thank in advance!

Best regards
Tri
-------------------------------------
RRDTool Command:

c:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Utstikker 2 - Route Eksternal- Traffic - Ping Latency" \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit="0" \
--vertical-label="milliseconds" \
--slope-mode \
--font TITLE:10: \
--font AXIS:7: \
--font LEGEND:8: \
--font UNIT:7: \
DEF:a="C\:/inetpub/wwwroot/cacti/rra/utstikker_2_-_route_eksternal-_traffic_ping_36.rrd":"ping":AVERAGE \
AREA:a#FFF200FF:"" \
GPRINTLAST:"Current\:%8.2lf %s" \
GPRINTAVERAGE:"Average\:%8.2lf %s" \
GPRINTMAX:"Maximum\:%8.2lf %s\n"

RRDTool Says:

OK
-------------------------------------------------------------------------

General Information about the cacti PC:

Date Mon, 23 Dec 2013 13:10:40 +0100
Cacti Version 0.8.8b
Cacti OS win32
SNMP Version NET-SNMP version: 5.5
RRDTool Version RRDTool 1.4.x
Hosts 9
Graphs 25
Data Sources Script/Command: 9
SNMP: 7
SNMP Query: 9
Total: 25
Poller Information
Interval 300
Type cmd.php
Items Action[0]: 25
Action[1]: 9
Total: 34
Concurrent Processes 1
Max Threads 1
PHP Servers 1
Script Timeout 25
Max OID 1
Last Run Statistics Time:9.8580 Method:cmd.php Processes:1 Threads:N/A Hosts:10 HostsPerProcess:10 DataSources:34 RRDsProcessed:25
PHP Information
PHP Version 5.3.27
PHP OS WINNT
PHP uname Windows NT PC-1 6.1 build 7601 (Windows 7 Business Edition Service Pack 1) i586
PHP SNMP Not Installed
max_execution_time 60
memory_limit 128M
------------------------------------------

[BSOD2600]

Why would you expect a Unix template to work on Windows? It won't.

Search the script forum and/or repository for alternatives. advanced ping is a good one.

[cacuser]

Thank you very much
I think, it works, but the graph shows Pkt Loss and Avg Loss: 100%
Is it right? Look at the attachment. Thanks again

[BSOD2600]

It would appear that way.

Sure that device responds to the type of pings (icmp, tcp, or udp) that cacti is using?

[cacuser]

OK. I am using both tcp and udp. Both graghs shows the same ressult. I can live with it

[BSOD2600]

try changing the template to icmp.

[cacuser]

I tried with Host Template: Cisco Router
Ping methede: ICMP

Ping Results: ICMP ping Timed out

Do you have any idea?

[BSOD2600]

does your device respond to icmp pings? sounds like not.

[cacuser]

Hello

Yes, I think the Cisco Switch 2960 did not respons on ICMP ping. I also enabled this command on the Switch "access-list 101 permit icmp any any echo-reply".

It showed the same problem.

Any idea?

[BSOD2600]

I'm not a IOS expert... once you can manually ping that cisco device FROM your cacti server at the commandline, then this graph will start to work.