Cacti Wrong graphs for sub-interfaces

[Engouf]

Hi All,

I using Cacti version 0.8.8a, currently i'm facing problem with graphing any inbound/outbound traffic for sub-interfaces [ different types ] as cacti plotting with wrong values as below:

cacti.jpg (95.96 KiB) Viewed 630 times

cacti1.jpg (89.56 KiB) Viewed 630 times

I used both ifInOctet/ifOutOctet & ifHCInOctet/ifHCOutOctet for both but the graph values is wrong other than the values via opening CLI sessions on these interfaces and also i tried to push traffic on these sub-interfaces to check if cacti will graphs accurate values or not, but the issue still exists

So, Should i consider this issue BUG and cacti to be upgraded to next version or what will be the proper solution for that issue as impact alot of graphs.

[Engouf]

Hi All,

I really need your help for that post.

Thanks,

[phalek]

What should these numbers actualy be and what does an snmpwalk on these interfaces return ?

[Engouf]

phalek,

Here below sample of return values from SNMP walk :

Cacti.jpg (58.79 KiB) Viewed 593 times

The graphed values is totally different from the reading via CLI.

Thanks,