Host Template: VLAN Statistics (for Catalyst 4500)

[overlord]

Ahh ok, thanks. I will try to get an IOS update for it, I feared that may have been the case.

[overlord]

Ok I upgraded IOS to 12.2(44) and still no luck. Manual snmpwalk says:

SNMPv2-SMI::mib-2.16.22.1.2.2.1.7 = No Such Instance currently exists at this OID

Is there any place I can find the proper OID?

Im using supervisor IV on a Catalyst 4506 with IOS 12.2(44)

[mohits]

Hi,

I am using Cacti 0.8.7b and used your template for Vlan Statistics but my SNMP query is not returning anything. I am using SNMP version 2 and the host to be monitored is Cisco 3560. The query is returning 0 rows. The debug mode output is below:

+ Running data query [17].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/vlan-snmp.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.16.22.1.2.2.1.7'
+ No SNMP data returned
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/vlan-snmp.xml'
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/vlan-snmp.xml'
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/vlan-snmp.xml'


please advise.

br,

[niobe]

Most likely the snmp oids are not supported on that platform.. You may be able to adapt my templates just by changing the oid if you can find a similar one in the MIBS for your Cisco device.

[itcac]

I have tweaked this a little..hope you don't mind

- Fixed OID regexp which was broken for index numbers not exactly 3 digits
- Added non unicast octets (or packets - forgot which one was missing).
- New 'sexy' graph templates for Packets and Traffic (see http://forums.cacti.net/viewtopic.php?t=25415)
- Clarified on axis that these stats are in+out
- Renamed some names/fields slightly to be consistent with other queries

I have tested on Catalyst 6500 and 4500, works a treat.

cheers,

N

Hi! Help me please. I need monitoring VLAN Traffic on my Catalyst 4500E with cacti (Version 0.8.8a)
I'am import your template cacti_data_query_cisco_-_vlan_statistics.xml, and put on /cacti/resource/snmp_queries cisco_vlan.xml,
but have error :

+ Running data query [11].
+ Found type = '3' [SNMP Query].
+ Found data query XML file at '/var/www/cacti/resource/snmp_queries/cisco_vlan.xml'
+ Error parsing XML file into an array.
+ Found data query XML file at '/var/www/cacti/resource/snmp_queries/cisco_vlan.xml'
+ Found data query XML file at '/var/www/cacti/resource/snmp_queries/cisco_vlan.xml'
+ Found data query XML file at '/var/www/cacti/resource/snmp_queries/cisco_vlan.xml'

[TJB]

Hi All,

Can anyone show me how to modify cisco-vlan.xml to get it working for a 3560?

Here is a link to the CISCO-VTP-MID.OID for use with the 3560:-

ftp://ftp.cisco.com/pub/mibs/oid/CISCO-VTP-MIB.oid

Here is a link to the SMON-MIB which was used to create the existing config for the 4500.

I just need to be able to see the total Mbps per vlan.

Can anyone please help?

Many Thanks