REQUEST: 95th percentile both directions + Bandwidth total

dino2000 · Post by **dino2000** » Tue Jun 02, 2009 11:26 am

to john_d13

how did you manage to create your graph to look like this?
i did import the template an it only showing 95th Percentile In and Out!
how do i add "Bandwidth Summation total in and out" all in one graph like you did.

thanks.

iggi · Post by **iggi** » Wed Jun 03, 2009 12:16 pm

Hmm, for some reason the 95th percentile seems to be reporting correctly, but the total bandwidth graphs seem to be off by a factor of 10, any way to fix that?

Post by **rony** » Wed Jun 03, 2009 7:52 pm

I got pressed for time, hence I didn't do the bytes graphs..

Take this and make it yours. Share your updates!

Post by **rony** » Wed Jun 03, 2009 7:54 pm

iggi wrote:Hmm, for some reason the 95th percentile seems to be reporting correctly, but the total bandwidth graphs seem to be off by a factor of 10, any way to fix that?

Um....

Typically this is an issue if you are selecting a range where RRDTool has to extrapolate the values, IE, crossing a consolidation boundary.

marlow · Post by **marlow** » Sat Jun 20, 2009 4:06 am

Thanks lads,

as the 95 percentile calculation (in+out) goes wrong with 64-bit counters, this really helped. Now I have usable 95-percentile values and graphs again.

/M

jamesclayb · Post by **jamesclayb** » Fri Jun 26, 2009 11:34 am

dino2000 wrote:to john_d13

how did you manage to create your graph to look like this?
i did import the template an it only showing 95th Percentile In and Out!
how do i add "Bandwidth Summation total in and out" all in one graph like you did.

thanks.

What I did was edit the following graph template:

"Interface - Traffic (bits/sec, 95th Percentile In and Out)"

I simply added 3 lines at the bottom of the graph that look like this:

Item # 14 COMMENT: Total Out: |sum:auto:current:2:auto| COMMENT AVERAGE

Item # 15 COMMENT: Total In: |sum:auto:current:2:auto| COMMENT AVERAGE

Item # 16 COMMENT: Total In+Out: |sum:auto:total:2:auto| COMMENT AVERAGE

These 3 lines will give you the in total, out total and combined in/out totals.

Hope that helps.

And big thanks to the creator of this template!

aXeR · Post by **aXeR** » Tue Jun 30, 2009 2:58 am

Hi Guys,

Will this graph work with Cacti version 0.8.7b as when I try to import the template I get:

Error: XML: Hash version does not exist.

Many Thanks

Selenius · Post by **Selenius** » Mon Jul 06, 2009 2:16 am

aXeR wrote:Hi Guys,

Will this graph work with Cacti version 0.8.7b as when I try to import the template I get:

Error: XML: Hash version does not exist.

Many Thanks

I open XML file in text editor and replace pattern "018" in hash by "016".

It works.

Post by **rony** » Fri Aug 07, 2009 8:59 am

Selenius wrote:
aXeR wrote:Hi Guys,

Will this graph work with Cacti version 0.8.7b as when I try to import the template I get:

Error: XML: Hash version does not exist.

Many Thanks
I open XML file in text editor and replace pattern "018" in hash by "016". It works.

While that would work, it is a hack. But, for this template, it would be ok to go as far back as 0.8.7.

sys0p · Post by **sys0p** » Mon Nov 09, 2009 6:32 pm

I have imported this template into 0.8.7e3 and now none of the rrd's are updating nor being created.

I don't see any error messages in the logs, debugging is on.

Does anyone ran into this ?

excellent · Post by **excellent** » Thu Nov 12, 2009 5:09 pm

I use this template aswell.
Everything works but the total traffic whon't update.

Anyone expirienced that, or found a way for it to update?

Kind Regards
M.

testerlein · Post by **testerlein** » Sun Apr 11, 2010 1:23 pm

john_d13 wrote:thank you

One thing i noticed is when graphing the 95th percentile out value decimal was incorrect showing 5434324.22

I changed Item 13 from 0 to 6 where its bold and now its looking fine

Item # 10 HRULE: |95:bits:0:current:2| HRULE AVERAGE FF0000 Move Down Move Up Delete
Item # 11 COMMENT: |95:bits:6:current:2| Mb<HR> COMMENT AVERAGE Move Down Move Up Delete
Item # 12 HRULE: |95:bits:0:current:2| HRULE AVERAGE FFC73B Move Down Move Up Delete
Item # 13 COMMENT: |95:bits:0:current:2| Mb<HR> COMMENT AVERAGE Move Down Move Up Delete

hi,
iÂ´d like zu implement this template in cacti.
when i import this, i get following message:

Error: XML parse error.

the hash_id ist updated.
Can you tell me what i have to to, to work this template?
The Cacti - Version is 0.8.7b

thanks for your HELP!!!

tobi

peruse · Post by **peruse** » Thu Nov 14, 2013 4:08 am

[quote="john_d13"]thank you

One thing i noticed is when graphing the 95th percentile out value decimal was incorrect showing 5434324.22

I changed Item 13 from 0 to 6 where its bold and now its looking fine

Item # 10 HRULE: |95:bits:0:current:2| HRULE AVERAGE FF0000 Move Down Move Up Delete
Item # 11 COMMENT: |95:bits:6:current:2| Mb<HR> COMMENT AVERAGE Move Down Move Up Delete
Item # 12 HRULE: |95:bits:0:current:2| HRULE AVERAGE FFC73B Move Down Move Up Delete
Item # 13 COMMENT: |95:bits:0:current:2| Mb<HR> COMMENT AVERAGE Move Down Move Up Delete[/quoti

i find 95percentile and the maximum values are equal.What might be the cause

Cacti

REQUEST: 95th percentile both directions + Bandwidth total

Re:

Who is online