I have create 95th percentile graph for first time and the graph and rra file created but the graph not display. the debug say "RRD Tool Say:" bit not say OK or and error.
/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title='test - Traffic - ' \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit='0' \
--vertical-label='bits per second' \
--slope-mode \
--font TITLE:10: \
--font AXIS:7: \
--font LEGEND:8: \
--font UNIT:7: \
DEF:a="/cacti-0.8.8a/rra/4/316.rrd":'traffic_in':AVERAGE \
DEF:b="/cacti-0.8.8a/rra/4/316.rrd":'traffic_out':AVERAGE \
CDEF:cdefa='a,8,*' \
CDEF:cdeff='b,8,*' \
CDEF:cdefbg='a,UN,INF,UNKN,IF' \
CDEF:cdefcc='TIME,1379523613,GT,a,a,UN,0,a,IF,IF,TIME,1379523613,GT,b,b,UN,0,b,IF,IF,+' \
AREA:cdefa#00CF00FF:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
COMMENT:"Transfer\: 179.06 MB" \
LINE1:cdeff#002A97FF:"Outbound" \
GPRINT:cdeff:LAST:"Current\:%8.2lf %s" \
HRULE:|95\:bits\:0\:current|#00FF00FF:"95%\:" \
GPRINT:cdeff:AVERAGE:"Average\:%8.2lf %s" \
COMMENT:"|95\:bits\:6\:current| mbit\n" \
GPRINT:cdeff:MAX:"Maximum\:%8.2lf %s\n" \
COMMENT:" \n" \
HRULE:939935.18#FF0000FF:"95th Percentile" \
COMMENT:"Inbound\: (687.56 kbit)\n" \
HRULE:939935.18#FF00FFFF:"95th Percentile" \
COMMENT:"(0.94 mbit in+out)" \
AREA:cdefbg#8F9286FF:"" \
COMMENT:"Transfer\: 140.95 MB" \
COMMENT:"Total Bytes Passed" \
HRULE:|95\:bits\:0\:current|#0000FFFF:"95%\:" \
COMMENT:"Inbound\: (140.95 MB)" \
COMMENT:"Outbound\: (140.95 MB)" \
COMMENT:"1.63 mbit" \
COMMENT:"Total Transfer\: 320.01 MB\n
RRDTool Says:
so appears to be there is data but not display. I have thousands graph and I don't have any issue. just this one.
