Graph title is showing|query_ifDescr|/|query_ifIndex|

[bgrunhovd]

So i am having the same issue with version 8.8a. What i have found out on mine is once i run create graph is on after i create it and go to the Data Sources. By clicking on Turn On Data Source Debug Mode the ones that work shows the following:
Data Source Debug

C:/rrdtool/rrdtool.exe create \
D:/Inetpub/wwwroot/cacti/rra/502/11249.rrd \
--step 300 \
DS:traffic_in:COUNTER:600:0:29983000 \
DS:traffic_out:COUNTER:600:0:29983000 \
RRA:AVERAGE:0.5:1:600 \
RRA:AVERAGE:0.5:6:700 \
RRA:AVERAGE:0.5:24:775 \
RRA:AVERAGE:0.5:288:797 \
RRA:MAX:0.5:1:600 \
RRA:MAX:0.5:6:700 \
RRA:MAX:0.5:24:775 \
RRA:MAX:0.5:288:797 \

and on the ones that don't is see the following:
Data Source Debug

C:/rrdtool/rrdtool.exe create \
D:/Inetpub/wwwroot/cacti/rra/502/11251.rrd \
--step 300 \
DS:traffic_in:COUNTER:600:0:U \
DS:traffic_out:COUNTER:600:0:U \
RRA:AVERAGE:0.5:1:600 \
RRA:AVERAGE:0.5:6:700 \
RRA:AVERAGE:0.5:24:775 \
RRA:AVERAGE:0.5:288:797 \
RRA:MAX:0.5:1:600 \
RRA:MAX:0.5:6:700 \
RRA:MAX:0.5:24:775 \
RRA:MAX:0.5:288:797 \


What i notice is that the Data source for traffic_in and traffic_out are different on the 2. The Data template the Maximum Value is set for 1000000000. But if you look you see the ones that don't work has a U which looks like it means No Maximum. I don't know why it won't show me what is at the Data Template.
Not sure if this helps or not.

[gandalf]

That does not help. U is "no MAX", and that's perfectly valid
R.