[BUG] Save Failed: Field Input Error - |query_ifSpeed|

[alvinshih]

when i view the items at the data source, and save any item without changing anything. it appear the error code:
Error: Save Failed: Field Input Error (Check Red Fields). <--- see as below

what can i do to fix this bug?

OS:CentOS 6.4 (Final)
Cacti:Version 0.8.8a

cacti.log:

03/28/2013 10:16:33 AM - CMDPHP: Poller[0] Validation Error on field 'rrd_maximum_781', value '|query_ifSpeed|': Save Failed: Field Input Error (Check Red Fields).
03/28/2013 10:16:33 AM - CMDPHP: Poller[0] Validation Error on field 'rrd_maximum_782', value '|query_ifSpeed|': Save Failed: Field Input Error (Check Red Fields).

[gandalf]

Please run a verbose query on that device for those interfaces. Please post a screenshot, then, indicating the interface where the error occurs.
I want to see whether a valid ifSpeed is given for that interface
R.

[ext]

I'm having the same error. Verbose query: http://pastebin.com/Ujxxk4vn

Interface speed seems correct to me and this happened to all devices I added.

[andyrue]

I too am experiencing this.

[gandalf]

I'm having the same error. Verbose query: http://pastebin.com/Ujxxk4vn

Interface speed seems correct to me and this happened to all devices I added.

Then, please see "System Utilities -> View SNMP Cache" and try to find the ifSpeed for exactly that interface
R.

[oneseventeen]

Just FYI, I'm getting the same message on my HP ProCurve 2848's.

In the SNMP Cache I can see the ifSpeed of each port just fine.

I receive this error message on all of the ports on all of my switches.

[ghartung13]

I don't see any movement on this in a while, but I see the same thing for all of my data sources.

Example:

Poller cache:
WDC1 BRDR02 - Traffic - ge-0/0/0 SNMP Version: 2, Community: ***, OID: .1.3.6.1.2.1.31.1.1.1.6.506
RRD: /var/www/cacti/rra/brdr02-wdc1_traffic_in_178.rrd

SNMP cache:
Host: WDC1 BRDR02 , SNMP Query: SNMP - Interface Statistics
Index: 506 , Field Name: ifSpeed , Field Value: 1000000000
OID: .1.3.6.1.2.1.2.2.1.5.506

Verbose query:
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.5'
+ Found item [ifSpeed='100000000'] index: 1 [from value]
+ Found item [ifSpeed='0'] index: 4 [from value]
+ Found item [ifSpeed='0'] index: 5 [from value]
+ Found item [ifSpeed='0'] index: 6 [from value]
+ Found item [ifSpeed='0'] index: 7 [from value]
+ Found item [ifSpeed='0'] index: 8 [from value]
+ Found item [ifSpeed='0'] index: 9 [from value]
+ Found item [ifSpeed='0'] index: 10 [from value]
+ Found item [ifSpeed='0'] index: 11 [from value]
+ Found item [ifSpeed='0'] index: 12 [from value]
+ Found item [ifSpeed='100000000'] index: 13 [from value]
+ Found item [ifSpeed='0'] index: 16 [from value]
+ Found item [ifSpeed='1000000000'] index: 17 [from value]
+ Found item [ifSpeed='1000000000'] index: 18 [from value]
+ Found item [ifSpeed='0'] index: 21 [from value]
+ Found item [ifSpeed='0'] index: 22 [from value]
+ Found item [ifSpeed='1000000000'] index: 23 [from value]
+ Found item [ifSpeed='1000000000'] index: 24 [from value]
+ Found item [ifSpeed='0'] index: 501 [from value]
+ Found item [ifSpeed='0'] index: 502 [from value]
+ Found item [ifSpeed='0'] index: 503 [from value]
+ Found item [ifSpeed='0'] index: 504 [from value]
+ Found item [ifSpeed='0'] index: 505 [from value]
+ Found item [ifSpeed='1000000000'] index: 506 [from value]
<etc>

I can walk it as well:
# snmpwalk -v2c -c *** 10.*.*.* 1.3.6.1.2.1.2.2.1.5.506
IF-MIB::ifSpeed.506 = Gauge32: 1000000000

All polling, graphing, etc. seem fine.
Thoughts?

Thanks,
Greg

[calinmarina]

I get the same here ... and it seems nobody's having a look at it... this topic is ageing here for ages now

[TheAmigo]

I get the same error in 0.8.8_f

Anyone find a fix yet?

[artiz]

Same problem here with 0.8.8h. All graphing works fine but ReportIt shows max value as NA unless the |query_ifSpeed| is replaced with a manually set value for the referenced data sources.

[tmac]

I am seeing this issue also running the latest Cacti build, it's been 4 years since this was posted, has there been a fixed released?

[bigrow]

I have noticed the exact same issue.

is there any type bug fix / work-around?

[netniV]

Not sure if there is an open bug report in the latest GitHub release, but if not I would recommend opening one there.

https://github.com/cacti/plugin_reportit/issues/

[kactilove]

Getting the same error message connected to netonix network switches and running Cacti version 0.8.8h
Screenshot:



Should we change the syntax ?

[cigamit]

Its been years since 0.8.8h so you may not find much help on it, but I believe that field requires an integer or "U".