Switch Port Traffic all the same data

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Developers, Moderators

Post Reply
andyrue
Posts: 5
Joined: Tue Sep 03, 2013 11:08 am

Switch Port Traffic all the same data

Post by andyrue »

I have an HP Procurve 1810G - 24 that is reporting the same traffic on each port. I'm attaching a picture of the ports all giving the exact same info, even though they all should be vastly different. Where should I start?

This is a new install of 0.8.8b running on Ubuntu 10.04 x64

Thanks for your help
Attachments
Graph of duplicate port info.
Graph of duplicate port info.
Cacti.PNG (203.34 KiB) Viewed 1252 times
andyrue
Posts: 5
Joined: Tue Sep 03, 2013 11:08 am

Re: Switch Port Traffic all the same data

Post by andyrue »

Bump. Any guidance on what I might check? I have a couple things that are doing this. Thanks!
paulgevers
Cacti Pro User
Posts: 613
Joined: Tue Aug 29, 2006 4:09 pm
Location: NL

Re: Switch Port Traffic all the same data

Post by paulgevers »

Did you read the debugging tips?

If yes, what were the answers?
Maintainer of cacti in Debian (and Ubuntu).
Cacti 1.* is now officially supported on Debian Stretch via Debian backports
FAQ Ubuntu and Debian differences
Generic cacti debugging
andyrue
Posts: 5
Joined: Tue Sep 03, 2013 11:08 am

Re: Switch Port Traffic all the same data

Post by andyrue »

Thank you, it seems the spine poller wasn't working correctly. I switched to cmd.php and it's giving believable results now.
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Re: Switch Port Traffic all the same data

Post by gandalf »

That sounds strange. Both are using the same OIDs to be polled ...
R.
andyrue
Posts: 5
Joined: Tue Sep 03, 2013 11:08 am

Re: Switch Port Traffic all the same data

Post by andyrue »

Ya, I'm not sure.....I'm not convinced what I'm seeing in graphs now are actually correct either, but the graphs are at least all different now. I'll look into the debugging info some more to see if anything comes up.
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Re: Switch Port Traffic all the same data

Post by gandalf »

Please keep us updated ...
R.
User avatar
Howie
Cacti Guru User
Posts: 5508
Joined: Thu Sep 16, 2004 5:53 am
Location: United Kingdom
Contact:

Re: Switch Port Traffic all the same data

Post by Howie »

I found that the spine 0.8.8b would also report SNMP timeouts that were impossible - 3 or 4 second "timeouts" but the entire run took less than 2 seconds. Not the same issue, but more SNMP-related strangeness.
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Re: Switch Port Traffic all the same data

Post by gandalf »

Howie, thanks for the hint. Please explain most exactly, how you have set up host and polling parameters to reproduce this strange issue
R.
User avatar
Howie
Cacti Guru User
Posts: 5508
Joined: Thu Sep 16, 2004 5:53 am
Location: United Kingdom
Contact:

Re: Switch Port Traffic all the same data

Post by Howie »

Actually I did :-) But I got no bites. I don't want to divert this thread too much, so here's the other one:
http://forums.cacti.net/viewtopic.php?f=21&t=50820
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests