Problem with snmp query to Motorola Canopy

[naitram]

Anyone with a bit more knowledge know why this was in place to begin with?

[celebratetoday]

Can't seem to get it working...

I swear, I finally got it installed (was having problems with MySQL) and now I can't figure out why the SNMP isn't working. If anyone could help, thanks in advance.

This is my setup.
All canopy equipment has public IP Addresses and are version 7.0.7. I am accessing the canopy from a static IP address and have the SNMP setup in the canopy to send the traps to my address and the accessing subnet to my subnet /24 (ie. 12.34.56.0/24). I get SNMP error in red when I try to add a device to Cacti. Any suggestions? Thanks again.

[TheWitness]

If you are running Cacti 0.8.6h and cactid, change your availability to SNMP or Ping and the device, even though it shows an SNMP error, should poll.

TheWitness

Also, I am considering a patch. Please run the following commands and post the results:

first:

Code: Select all

snmpgetnext -c <your_community> -v 1 <your_host> .1.3.6.1.2.1.1.3.0

second:

create a file that contains the following:

Code: Select all

<?php print "The result was: " . snmpgetnext("your_host:your_port", "your_community", ".1.3.6.1.2.1.1.3.0", 2, 2) . "\n";?>

Then run that file using "php myfile.php".

Thanks

[celebratetoday]

First the first statement I get Timeout: No Response from XX.245.189.138

Ok, an edit to my original post. I didn't have the extensions directories set up properly to "extensions/" so it couldn't find the snmp files. My apologies... This is what I get now for the second

Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (SNMPv2-MIB): At line 0 in (none)
Cannot find module (SNMPv2-SMI): At line 0 in (none)
Cannot find module (UCD-SNMP-MIB): At line 0 in (none)
Cannot find module (UCD-DEMO-MIB): At line 0 in (none)
Cannot find module (SNMP-TARGET-MIB): At line 0 in (none)
Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none)
Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none)
Cannot find module (UCD-DLMOD-MIB): At line 0 in (none)
Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none)
Cannot find module (SNMP-MPD-MIB): At line 0 in (none)
Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none)
Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none)
Cannot find module (SNMPv2-TM): At line 0 in (none)
C:/usr/etc/snmp/snmp.conf: line 2: Warning: Unknown token: persistentDir.
C:/usr/etc/snmp/snmp.conf: line 3: Warning: Unknown token: tempFilePattern.
PHP Fatal error: Call to undefined function: snmpgetnext() in C:\Documents and
Settings\Chris\Desktop\testfile.php on line 1
X-Powered-By: PHP/4.4.2
Content-type: text/html