Here is the output of the loadavg_multi.pl script on the mail/DNS server
Oakfieldleft-mail:/usr/local/bin$ sudo ./loadavg_multi.pl
1min:0.01 5min:0.02 10min:0.00
Here is the output of a snmpwalk from the Cacti machine
homeserver:/usr/share/cacti/site/scripts$ sudo ./unix_rem_loadavg.pl 192.168.2.xxx
incoming:0 active:0 deferred:0 hold:0
1min:0.00 5min:0.00 10min:0.00
SIOTemp:33.0 VCC:3.3 Vcore:1.4 cpu0_vid:1.5 in0:2.4 in6:1.5 in7:1.7 temp2:36.0 temp3:31.0
The above script simply is used to query remote clients who use SNMP's extend feature to send data through this protocol. The script is posted below. As you can see, only one index is used for all extend information.
#!/bin/bash
#/usr/share/cacti/site/scripts/rem_snmp.pl
#/usr/bin/snmpwalk -Oqav -v2c -c *communityname* -t30 $1 '.1.3.6.1.4.1.8072.1.3.2.3.1$
output=`/usr/bin/snmpwalk -Oqav -v2c -c *communityname* -t30 $1 '.1.3.6.1.4.1.8072.1.$
printf "$output"
echo
This is the data input method page showing the output names.
- Here is a screenshot of the data input method page. I've looked over this many times and nothing seems to be out of order.
- cacti_datainput.jpg (240.9 KiB) Viewed 2415 times
- Here is a picture of the graph. As you can see, no data for the 1 min poll is showing.
- cacti_loadavg.jpg (64.29 KiB) Viewed 2415 times
Please advise. Thanks!
