I have spent the whole night trying to get some graphs working however I am not getting anywhere at all. I have used Cacti before but I have been tasked with getting a new Technology ingergrated. We have lots of other devices that are working perfectly fine I have tried to cross reference the configuration but no luck. I am trying to Graph some new Wireless Microwave Equipment the highest it can go is -80 and the lowest is -25.
I no the OID I am trying to use (Used a snmpwalk) It returns the correct value
Chriss-MacBook-Pro-2:~ ChrisMBP$ snmpwalk -c public -O n 10.17.0.200 1.3.6.1.4.1.3373.19.10.1.1.12
.1.3.6.1.4.1.3373.19.10.1.1.12.1 = INTEGER: -44
RRD Debug returns with the following
RRDTool Command:
/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="BICKERDIKE-PLATT.SIAE.MASTER - Modem RSL" \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="dBm" \
--slope-mode \
--font TITLE:10: \
--font AXIS:8: \
--font LEGEND:8: \
--font UNIT:8: \
DEF:a="/var/www/html/rra/bickerdike-platt_siae_master_r3rsl_2046.rrd":r3rsl:LAST \
LINE1:a#4444FFFF:"" \
GPRINT
LAST:"Last\:%8.2lf%s" \GPRINT
AVERAGE:"Avg\:%8.2lf%s" \GPRINT
MIN:"Min\:%8.2lf%s" \GPRINT
MAX:"Max\:%8.2lf%s\n" RRDTool Says:
OK
After creating the graph I just get no information at all? Any ideas? If you need further debug just ask for it and I will provide.
Thank you
