Still learning Cacti

Support questions about the Network Weather Map plugin

Moderators: Developers, Moderators

Post Reply
jmwhitesr31
Posts: 3
Joined: Mon Jan 28, 2013 9:06 am

Still learning Cacti

Post by jmwhitesr31 »

I am learning Cati and I am having difficulty fixing my weather map. I have the following errors when Add new sites. I have taken

01/28/2013 09:09:30 AM - WEATHERMAP: Poller[0] WARNING: [Map 2] WAN Connectivity.conf: RRD ReadData: At least one of your DS names (avg and -) were not found, even though there was a valid data line. Maybe they are wrong? Valid DS names in this file are: active_ports,total_ports,active_macs,trunk_ports, [WMRRD06]
01/28/2013 09:09:30 AM - WEATHERMAP: Poller[0] WARNING: [Map 2] WAN Connectivity.conf: RRD ReadData: poller_output: /600/32594.rrd is not a valid RRD filename within this Cacti install. is C:/Cacti/Apache2/htdocs/cacti/rra [WMRRD08]
01/28/2013 09:09:30 AM - WEATHERMAP: Poller[0] WARNING: [Map 2] WAN Connectivity.conf: NODE <SITENAME> has a relative position to an unknown node! [WMWARN10]
01/28/2013 09:09:30 AM - WEATHERMAP: Poller[0] WARNING: [Map 2] WAN Connectivity.conf: NODE<SITENAME>has a relative position to an unknown node! [WMWARN10]
01/28/2013 09:09:29 AM - WEATHERMAP: Poller[0] WARNING: [Map 2] WAN Connectivity.conf: line 433: TEMPLATE is not first line of object. Some data may be lost. [WMWARN39]
01/28/2013 09:09:29 AM - WEATHERMAP: Poller[0] WARNING: [Map 2] WAN Connectivity.conf: Unrecognised config on line 432: NODE <SITENAME> Latency


I am not sure how to fix this.Can someone please advise me...
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:

Re: Still learning Cacti

Post by gandalf »

Moving to WeatherMap forum
R.
imfv
Posts: 7
Joined: Wed Jan 25, 2012 11:04 am

Re: Still learning Cacti

Post by imfv »

Can you post your .conf? At least the configuration that have the errors

Maybe it helps:
- At least one of your DS names (avg and -) -> First you need to check if your DS exists.
- The error: "has a relative position to an unknown node! [WMWARN10]" -> you should check the names of nodes.

Example bellow I have a relative position and of node with rrd output:

NODE MZ-IT-C1-FW-027-A
POSITION 400 330

NODE CPUFW027
LABEL CPU: {node:this:bandwidth_in:%.2f}%
LABELFONT 1
INFOURL /cacti/graph.php?rra_id=all&local_graph_id=833
OVERLIBGRAPH /cacti/graph_image.php?rra_id=0&graph_height=100&graph_width=350&local_graph_id=833
TARGET gauge:E:/Apache2/htdocs/cacti/rra/141/939.rrd:asa5min_cpu:-
POSITION MZ-IT-C1-FW-027-A 60 -20
"If I have seen further it is by standing on the shoulders of Giants." Isaac Newton
User avatar
Howie
Cacti Guru User
Posts: 5508
Joined: Thu Sep 16, 2004 5:53 am
Location: United Kingdom
Contact:

Re: Still learning Cacti

Post by Howie »

Also, it looks like you have a node name with a space in it. That will cause problems.
(<SITENAME> Latency should be something like <SITENAME>_Latency)

This will probably fix the 'unknown node' error too - if you have other nodes positioned relative to one that Weathermap is ignoring.
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
jmwhitesr31
Posts: 3
Joined: Mon Jan 28, 2013 9:06 am

Re: Still learning Cacti

Post by jmwhitesr31 »

HEre are the errors. Gandalf I took the space out of the name for the latency error line when I created the site in Cacti.

03/27/2013 07:47:30 AM - WEATHERMAP: Poller[0] WARNING: [Map 60] Broomfield Layout.conf: ReadData: LINK CoreToUtils, target: C:/Cacti/Apache2/htdocs/cacti/rra/602/32875.rrd on config line 159 of C:\Cacti\Apache2\htdocs\cacti\plugins\weathermap\configs\Broomfield Layout.conf had no valid data, according to WeatherMapDataSource_rrd
03/27/2013 07:47:30 AM - WEATHERMAP: Poller[0] WARNING: [Map 60] Broomfield Layout.conf: Target C:/Cacti/Apache2/htdocs/cacti/rra/602/32875.rrd doesn't exist. Is it a file? [WMRRD06]
03/27/2013 07:47:30 AM - WEATHERMAP: Poller[0] WARNING: [Map 60] Broomfield Layout.conf: RRD ReadData: poller_output: /602/32875.rrd is not a valid RRD filename within this Cacti install. is C:/Cacti/Apache2/htdocs/cacti/rra [WMRRD08]
03/27/2013 07:47:30 AM - WEATHERMAP: Poller[0] WARNING: [Map 60] Broomfield Layout.conf: RRD ReadData: poller_output: /602/32875.rrd is not a valid RRD filename within this Cacti install. is C:/Cacti/Apache2/htdocs/cacti/rra [WMRRD08]
03/27/2013 07:47:30 AM - WEATHERMAP: Poller[0] WARNING: [Map 60] Broomfield Layout.conf: ReadData: LINK SiteToMPLS, target: C:/Cacti/Apache2/htdocs/cacti/rra/600/32895.rrd on config line 138 of C:\Cacti\Apache2\htdocs\cacti\plugins\weathermap\configs\Broomfield Layout.conf had no valid data, according to WeatherMapDataSource_rrd
03/27/2013 07:47:30 AM - WEATHERMAP: Poller[0] WARNING: [Map 60] Broomfield Layout.conf: RRD ReadData: At least one of your DS names (traffic_in and traffic_out) were not found, even though there was a valid data line. Maybe they are wrong? Valid DS names in this file are: loss,avg,max,dev,min, [WMRRD06]
03/27/2013 07:47:30 AM - WEATHERMAP: Poller[0] WARNING: [Map 60] Broomfield Layout.conf: RRD ReadData: poller_output: traffic_out is not a valid DS name for /600/32895.rrd - valid names are: avg, dev, loss, max, min [WMRRD07]
03/27/2013 07:47:30 AM - WEATHERMAP: Poller[0] WARNING: [Map 60] Broomfield Layout.conf: RRD ReadData: poller_output: traffic_in is not a valid DS name for /600/32895.rrd - valid names are: avg, dev, loss, max, min [WMRRD07]
03/27/2013 07:47:29 AM - WEATHERMAP: Poller[0] WARNING: [Map 2] WAN Connectivity.conf: ReadData: NODE BroomfieldLatency, target: gauge:C:/Cacti/Apache2/htdocs/cacti/rra/600/32594.rrd:avg:- on config line 126 of C:\Cacti\Apache2\htdocs\cacti\plugins\weathermap\configs\WAN Connectivity.conf had no valid data, according to WeatherMapDataSource_rrd
03/27/2013 07:47:29 AM - WEATHERMAP: Poller[0] WARNING: [Map 2] WAN Connectivity.conf: RRD ReadData: At least one of your DS names (avg and -) were not found, even though there was a valid data line. Maybe they are wrong? Valid DS names in this file are: active_ports,total_ports,active_macs,trunk_ports, [WMRRD06]
03/27/2013 07:47:29 AM - WEATHERMAP: Poller[0] WARNING: [Map 2] WAN Connectivity.conf: RRD ReadData: poller_output: /600/32594.rrd is not a valid RRD filename within this Cacti install. is C:/Cacti/Apache2/htdocs/cacti/rra [WMRRD08]
03/27/2013 07:47:29 AM - WEATHERMAP: Poller[0] WARNING: [Map 2] WAN Connectivity.conf: NODE KansascitynorthLatency has a relative position to an unknown node! [WMWARN10]
03/27/2013 07:47:29 AM - WEATHERMAP: Poller[0] WARNING: [Map 2] WAN Connectivity.conf: NODE KansascitynorthLatency has a relative position to an unknown node! [WMWARN10]
03/27/2013 07:47:28 AM - SYSTEM STATS: Time:15.8340 Method:spine Processes:4 Threads:16 Hosts:499 HostsPerProcess:125 DataSources:50819 RRDsProcessed:0
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest