Problem with down host threshold 0.4.9.3

Support questions about the Threshold plugin

Moderators: Developers, Moderators

Post Reply
bkbgodlike
Posts: 2
Joined: Sat Feb 02, 2013 2:09 pm

Problem with down host threshold 0.4.9.3

Post by bkbgodlike »

Hi i have some problem with down host in threshold 0.4.9.3. I do not receive re-alert down host when my host is down. I have check my log and see that
02/03/2013 09:35:06 AM - SYSTEM THOLD STATS: Time:0.0650 Tholds:8 DownHosts:0
02/03/2013 09:30:07 AM - SYSTEM THOLD STATS: Time:0.2191 Tholds:8 DownHosts:1

At this time i have 1 host down but seem that it show wrong. Any can help me solve that problem.Sorry for my english

My setting is:
Default Trigger Count:1
Re-Alerting:7

Thanks you very much
combellm
Cacti User
Posts: 111
Joined: Mon Oct 10, 2011 9:51 am
Location: PARIS, France

Re: Problem with down host threshold 0.4.9.3

Post by combellm »

Hi,
I think that for host DOWN/UP notifications the settings used are in the settings/poller tab at the bottom.
There you will find the Host Up/Down Settings.
Check this values.
I have:
Failure Count: 4
Recovery Count: 2

The value you were talking about is only for treshold like CPU usage and stuff.

I works pretty well for me with the previous settings but I can't find the time value between 2 alert (It spams my team every minute when a host is down!)
If anyone that read it can help me to change it!

Good luck :)
--
knowledge is the only thing which increases, when shared
bkbgodlike
Posts: 2
Joined: Sat Feb 02, 2013 2:09 pm

Re: Problem with down host threshold 0.4.9.3

Post by bkbgodlike »

I have checked my setting in poller tab. But my problem is here
02/03/2013 09:35:06 AM - SYSTEM THOLD STATS: Time:0.0650 Tholds:8 DownHosts:0
02/03/2013 09:30:07 AM - SYSTEM THOLD STATS: Time:0.2191 Tholds:8 DownHosts:1
after 1 cycle the number of host down is went to 0. But in that time,i check in device tab and still see 1 host down.
And i do not receive re-alert host down message when my host is still down.
combellm
Cacti User
Posts: 111
Joined: Mon Oct 10, 2011 9:51 am
Location: PARIS, France

Re: Problem with down host threshold 0.4.9.3

Post by combellm »

What are your Failure Count and Recovery Count values?
And also check availability options in your device settings.
Is the alert comming back after a few poller cycle?
--
knowledge is the only thing which increases, when shared
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest