Problems with FlowView in CactiEZ

[fabiann79]

Hello!

I need help please.

The problem is that i see nothing in the FlowView. I have CactiEZ Version 0.8.8a installed.

The router time and the cacti time is synchronized. And the files to /var/netflow/flows are not empty, but the “viewer” shows nothing.

[root@localhost 2012-12-04]# ls -l
total 138416
-rw-r–r– 1 root root 75360 Dec 4 00:01 ft-v05.2012-12-04.000001-0300
-rw-r–r– 1 root root 104544 Dec 4 00:02 ft-v05.2012-12-04.000100-0300
-rw-r–r– 1 root root 95328 Dec 4 00:03 ft-v05.2012-12-04.000200-0300
-rw-r–r– 1 root root 106080 Dec 4 00:04 ft-v05.2012-12-04.000301-0300
-rw-r–r– 1 root root 96864 Dec 4 00:05 ft-v05.2012-12-04.000400-0300
-rw-r–r– 1 root root 96864 Dec 4 00:06 ft-v05.2012-12-04.000500-0300
-rw-r–r– 1 root root 92256 Dec 4 00:07 ft-v05.2012-12-04.000601-0300
-rw-r–r– 1 root root 96864 Dec 4 00:08 ft-v05.2012-12-04.000700-0300
-rw-r–r– 1 root root 92256 Dec 4 00:09 ft-v05.2012-12-04.000800-0300
-rw-r–r– 1 root root 81504 Dec 4 00:10 ft-v05.2012-12-04.000900-0300
-rw-r–r– 1 root root 73824 Dec 4 00:11 ft-v05.2012-12-04.001000-0300
-rw-r–r– 1 root root 93792 Dec 4 00:12 ft-v05.2012-12-04.001100-0300
-rw-r–r– 1 root root 84576 Dec 4 00:13 ft-v05.2012-12-04.001200-0300

Test with TCDump are ok and iptables are disabled.

The files contain correct data:

[root@localhost 2012-12-04]# flow-print < /var/netflow/flows/2012-12-04/ft-v05.2012-12-04.111400-0300| head -15
srcIP dstIP prot srcPort dstPort octets packets
200.x.x.x 190.x.x.x 6 44975 80 662 4
190.x.x.x 200.16.x.x 6 80 52694 2151 4
190.x.x.x 200.16.x.x 6 80 40983 6305 7
190.x.x.x 200.16.x.x 6 80 44975 2265 4
64.x.x.x 10.77.x.x 6 443 58976 77 1
200.x.x.x 69.x.x.x 6 18199 80 1237 4
200.x.x.x 69.x.x.x 17 48451 53 83 1
208.x.x.x 200.x.x.x 17 53 20884 189 1
204.x.x.x 200.x.x.x 17 53 19243 117 1
200.x.x.x 23.x.x.x 6 52521 80 1019 5
74.x.x.x 200.x.x.x 6 443 39240 78 1
200.x.x.x 74.x.x.x 6 39240 443 52 1
204.x.x.x 200.x.x.x 17 53 7348 224 1
207.x.x.x 200.x.x.x 6 80 39916 810 3
[root@localhost 2012-12-04]#

Any idea?

Sorry for my bad english.

Thanks!

[Maximeva]

Same problem here.. Can't display the flows. But they are in the folder /flows

[Dinmar]

Same problem here...
In addition when i open any chart i have only an error:

Open Flash Chart

JSON Parse Error [Syntax Error]
Error at character 0, line 1:

0:

Regards

[georkings]

Hi,

I have the same problem here.

Please there are someone that have found any solution. Many people have this problem and the support is very poor.
Maybe the problem it's that this plugin version isn't compatible with cacti version 0.8.8a.

Any help will be appreciated.

I'm using cacti 0.8.8a and flowview 1.1