Can't get |query_field_name| variables to display

[acominoli]

I set up a data query and the values return correctly. But when I create a Comment item in a graph and specify Model: |pduModel| it shows exactly as typed to the left. It does not substitute the actual query variable.
XML file:
<interface>
<name>Get APC7900 Info</name>
<index_order_type>numeric</index_order_type>
<oid_index>.1.3.6.1.4.1.318.1.1.12.1</oid_index>

<fields>
<pduModel>
<name>Model</name>
<method>walk</method>
<source>value</source>
<direction>input</direction>
<oid>.1.3.6.1.4.1.318.1.1.12.1.5</oid>
</pduModel>
<pduSerial>
<name>Serial Number</name>
<method>walk</method>
<source>value</source>
<direction>input</direction>
<oid>.1.3.6.1.4.1.318.1.1.12.1.6</oid>
</pduSerial>
<pduFirmware>
<name>Firmware</name>
<method>walk</method>
<source>value</source>
<direction>input</direction>
<oid>.1.3.6.1.4.1.318.1.1.12.1.3</oid>
</pduFirmware>


</fields>
</interface>

Verbose query results:
+ Running data query [13].
+ Found type = '3' [SNMP Query].
+ Found data query XML file at 'C:/inetpub/wwwroot/cacti/resource/snmp_queries/AP7900-Info.xml'
+ XML file parsed ok.
+ <oid_num_indexes> missing in XML file, 'Index Count Changed' emulated by counting oid_index entries
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.4.1.318.1.1.12.1' Index Count: 18
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.1.0' value: 'GHC-SPDU'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.2.0' value: 'B2'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.3.0' value: 'v3.7.0'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.4.0' value: '04/30/2009'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.5.0' value: 'AP7900'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.6.0' value: 'ZA0918003498'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.7.0' value: '12'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.8.0' value: '8'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.9.0' value: '1'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.10.0' value: '0'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.11.0' value: '0'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.12.0' value: '1'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.13.0' value: '1'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.14.0' value: '1'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.15.0' value: '120'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.16.0' value: '528'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.17.0' value: '1000'
+ Index found at OID: '1.3.6.1.4.1.318.1.1.12.1.18.0' value: '528'
+ Located input field 'pduModel' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.4.1.318.1.1.12.1.5'
+ Found item [pduModel='AP7900'] index: 0 [from value]
+ Located input field 'pduSerial' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.4.1.318.1.1.12.1.6'
+ Found item [pduSerial='ZA0918003498'] index: 0 [from value]
+ Located input field 'pduFirmware' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.4.1.318.1.1.12.1.3'
+ Found item [pduFirmware='v3.7.0'] index: 0 [from value

[gandalf]

Please use |query_pduModel| instead
R.

[acominoli]

I actually have it that way and that is what shows on the graph i.e. Model: |pduModel|

pduModel.png (26.44 KiB) Viewed 874 times

[gandalf]

!) Which version of Cacti are you using, please?
2) Navigate to "System Utilities -> View SNMP Cache and search for the device and the pduModel. Do you find it here?
R.

[acominoli]

Yes it shows the following:

Host: GHC-SPDU , SNMP Query: AP7900 - Info
Index: 0 , Field Name: pduModel , Field Value: AP7900
OID: .1.3.6.1.4.1.318.1.1.12.1.5.0

Cacti Version 0.8.8a

[gandalf]

Ah, got it.
Currently, you are using the last OID part as the index (just as "usually). But in fact, the last part always shows ".0". So, in fact, you should use the last two parts of the OID as the index, e.g. ".1.0", ".2.0", ".3.0" etc.
You will have to use a OID/REGEXP to do so. Search forums for multi-level indexes and/or 1st link of my sig
R.