Can i add the VoIP number of current calls on Cisco AS5300 ?

[Ip-Watch]

Hello all,

I have a Cisco AS5300 .. and its runing as a VoIP GW

to give you the exact requirment, when i login to the AS5300 i issue this command to know the current running number of calls :

# sh voip rtp connections

it lists all the connections for the VoIP calls ... and at the last line it will says something like : Found 23 active calls ..

I just need this "23" number to be pulled somehow from the AS5300 and then graph it by Cacti ..

is this possible ?

i really hope so...

thanks a alot.

[egarnel]

you can use an expect script to telnet into the device and grab the info.
I use a perl script called mrat.pl to do this with my cisco devices. very useful indeed. I primarily use it via cron to dump the configs to a tftp server

see http://www.garnel.com/mrtg/pix-vpn.html for an example & scripts.
It has been a long time since I updated the site or the scripts, so the info may be a bit dated, but still applicable.

Also, I am not a coder so my scripts are functional enough to do the task I require of them and they could probably be written better. I provide them as
an example of HOW to do something.

[neovox]

I'm actually looking for an oid to capture the output of the same cisco command. Anyone know it off hand. Thanks.

[joseme]

Hi:
If you are searching for an active calls OID:

.1.3.6.1.4.1.9.10.19.1.1.4.0


if not try searching in MIB Cisco Locator (on Cisco web page).