Can't View the Graph

[migzmiguel]

Can't View the Graph, how can i fix this problem

[artagel]

This has been covered hundreds of times on the forums.
Check your rrds and make sure you are getting data.
Check your debugs.
-Dan

[migzmiguel]

how can fix this error

SPINE: Using spine config file [spine.conf]
MYSQL Connection Failed: Error:'1130', Message:'Host 'cacti' is not allowed to connect
MYSQL Connection Failed: Error:'1130', Message:'Host 'cacti' is not allowed to connect
MYSQL Connection Failed: Error:'1130', Message:'Host 'cacti' is not allowed to connect
MYSQL Connection Failed: Error:'1130', Message:'Host 'cacti' is not allowed to connect
MYSQL Connection Failed: Error:'1130', Message:'Host 'cacti' is not allowed to connect
MYSQL Connection Failed: Error:'1130', Message:'Host 'cacti' is not allowed to connect

[artagel]

Looks like your config.php isn't configured right.

http://www.cacti.net/downloads/docs/htm ... cacti.html

[migzmiguel]

thank you i fix that error
but i got some error again

SPINE: Using spine config file [spine.conf]
SPINE: Version 0.8.8a starting
no log handling enabled - turning on strderr logging
Cannot find module <SNMPv2-MIB>: At line 0 <none>
Cannot find module <SNMPv2-SMI>: At line 0 <none>
Cannot find module <SNMP-VIEW-BASED-ACM-MIB>: At line 0 in <none>
Cannot find module <SNMP-COMMUNITY-MIB>: At line 0 in <none>
Cannot find module <HOST-RESOURCES-MIB>: At line 0 in <none>
Cannot find module <HOST-RESOURCES-TYPES>: At line 0 in <none>
Cannot find module <DISMAN-EVENT-MIB>: At line 0 in <none>


in my logs
SPINE: Poller[0] Host[5] ERROR: Problems parsing Multi SNMP OID! (oid: ), Set MAX_OIDS to 1 for this host to isolate bad OID

[artagel]

I'm guessing you should install net-snmp and point to the net-snmp binary paths.
-Dan

[migzmiguel]

i already install the net-snmp
the same error

and i set the net-snmp binary paths.

[BSOD2600]

1) switch back to the cmd.php poller until cacti is functional.
2) follow the guides in http://forums.cacti.net/viewtopic.php?f=3&t=11747

[migzmiguel]

how can i fix this error i have 1 error its say no "log handling enabled"

message of spine
SPINE: Version 0.8.8a starting
cygwin warning:
ms-dos style path detected: C:\PHP\Extra\mibs
preferred posix equivalent is: /PHP/extras/mibs
cymwin environment variable option "nodosfilewarning" turn off this warning.

no log handling enabled - turning on stderr logging
cannot find module <desman-event-mib>: at line 1 in <none>

[BSOD2600]

how can i fix this error i have 1 error its say no "log handling enabled"

Because you are suppose to be using cmd.php now instead of spine.

[migzmiguel]

and i got some error on poller.php
how can i fix this error

09/13/2012 07:05:02 AM - POLLER: Poller[0] WARNING: Scheduled Task is out of sync with the Poller Interval! The Poller Interval is '300' seconds, with a maximum of a '300' second Scheduled Task, but 336 seconds have passed since the last poll! 09/13/2012 07:05:02 AM - POLLER: Poller[0] WARNING: Poller Output Table not Empty. Issues Found: 6, Data Sources: proc(DS[22]), snmp_oid(DS[23]), traffic_in(DS[24]), traffic_out(DS[24]), traffic_in(DS[25]), traffic_out(DS[25])
OK u:0.01 s:0.00 r:2.44
OK u:0.01 s:0.00 r:2.44
OK u:0.01 s:0.00 r:2.48
OK u:0.01 s:0.00 r:2.48
09/13/2012 07:05:05 AM - SYSTEM STATS: Time:2.7457 Method:spine Processes:1 Threads:1 Hosts:4 HostsPerProcess:4 DataSources:6 RRDsProcessed:4