Dear Sir,
We have some Gigabit Interfaces in which traffic flow more than 100 Mbps. Whenever traffic goes beyond 114 Mbps we get breaked graph as clearly shown in attached file.kindy see the attached graph document.
i check the cacti log file also it showing the following error.
08/30/2012 11:05:02 AM - SYSTEM STATS: Time:0.3101 Method:cmd.php Processes:2 Threads:N/A Hosts:4 HostsPerProcess:2 DataSources:7 RRDsProcessed:4
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] Host[46] DS[674] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10113'
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] Host[46] DS[669] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10107'
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] Host[46] DS[669] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10107'
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] Host[46] DS[665] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10102'
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] Host[46] DS[665] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10102'
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] Host[46] DS[674] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10113'
08/30/2012 11:05:01 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '60' seconds, with a maximum of a '300' second Cron, but 300 seconds have passed since the last poll!
08/30/2012 11:00:01 AM - SYSTEM STATS: Time:0.2082 Method:cmd.php Processes:2 Threads:N/A Hosts:4 HostsPerProcess:2 DataSources:6 RRDsProcessed:3
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] Host[46] DS[664] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10101'
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] Host[46] DS[664] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10101'
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] Host[46] DS[670] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10108'
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] Host[46] DS[670] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10108'
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] Host[46] DS[675] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10115'
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] Host[46] DS[675] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10115'
08/30/2012 11:00:01 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '60' seconds, with a maximum of a '300' second Cron, but 300 seconds have passed since the last poll!
08/30/2012 10:55:01 AM - SYSTEM STATS: Time:0.2086 Method:cmd.php Processes:2 Threads:N/A Hosts:4 HostsPerProcess:2 DataSources:10 RRDsProcessed:5
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[48] DS[679] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.100', and OID:'.1.3.6.1.2.1.31.1.1.1.6.27'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[48] DS[679] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.100', and OID:'.1.3.6.1.2.1.31.1.1.1.10.27'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[46] DS[672] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10111'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[46] DS[672] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10111'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[46] DS[666] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10103'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[46] DS[666] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10103'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[46] DS[676] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10116'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[46] DS[676] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10116'
08/30/2012 10:55:01 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '60' seconds, with a maximum of a '300' second Cron, but 299 seconds have passed since the last poll!
08/30/2012 10:50:02 AM - SYSTEM STATS: Time:0.2112 Method:cmd.php Processes:2 Threads:N/A Hosts:4 HostsPerProcess:2 DataSources:9 RRDsProcessed:5
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[48] DS[680] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.100', and OID:'.1.3.6.1.2.1.31.1.1.1.6.26'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[48] DS[680] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.100', and OID:'.1.3.6.1.2.1.31.1.1.1.10.26'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[46] DS[671] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10109'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[46] DS[671] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10109'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[46] DS[667] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10105'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[46] DS[667] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10105'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[46] DS[677] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10118'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[46] DS[677] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10118'
08/30/2012 10:50:02 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '60' seconds, with a maximum of a '300' second Cron, but 301 seconds have passed since the last poll!
08/30/2012 10:45:01 AM - SYSTEM STATS: Time:0.2081 Method:cmd.php Processes:2 Threads:N/A Hosts:4 HostsPerProcess:2 DataSources:9 RRDsProcessed:5
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] Host[46] DS[673] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10112'
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] Host[46] DS[673] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10112'
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] Host[46] DS[668] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10106'
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] Host[46] DS[668] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10106'
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] Host[46] DS[678] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10122'
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] Host[46] DS[678] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10122'
08/30/2012 10:45:01 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '60' seconds, with a maximum of a '300' second Cron, but 300 seconds have passed since the last poll!
Thanks
shafi
Problem in cacti graph when traffic goes more than 114 Mb
Moderators: Developers, Moderators
Problem in cacti graph when traffic goes more than 114 Mb
Last edited by shafikhan on Thu Dec 06, 2012 8:03 am, edited 1 time in total.
Re: Problem in cacti graph when traffic goes more than 114 M
--
Live fast, die young
You're sucking up my bandwidth.
J.P. Pasnak,CD
CCNA, LPIC-1
http://www.warpedsystems.sk.ca
Live fast, die young
You're sucking up my bandwidth.
J.P. Pasnak,CD
CCNA, LPIC-1
http://www.warpedsystems.sk.ca
Re: Problem in cacti graph when traffic goes more than 114 M
It seems that each time you create a new graph, you leave the pickdown "select graph type" by default, which is IN/OUT bits. It means 32 bit snmp counters, so you will no be able to monitor heavy traffic.
Delete one of those graphs, and while your a creating it pay attention to the pickdown "select graph type", choose there IN/OUT bits (64 bit counters). That will lead you to monitor high speed bdw.
hope this helps
Delete one of those graphs, and while your a creating it pay attention to the pickdown "select graph type", choose there IN/OUT bits (64 bit counters). That will lead you to monitor high speed bdw.
hope this helps
Re: Problem in cacti graph when traffic goes more than 114 M
Dear Sir,
i already change the snmp version 2 and 64 bit counter but i am still facing the same problem.
thanks
i already change the snmp version 2 and 64 bit counter but i am still facing the same problem.
thanks
Re: Problem in cacti graph when traffic goes more than 114 M
please provide the folllowing outputs:
1. Goto "data sources", select the corresponding DEVICE on the pickdown and then the INTERFACE we are testing for diagnose. capture a print screen and share the image to see the values
2. on your linux command line run
rrdtool info /yourcactitree/rra/xxxxxx.rrd (where xxxxxx is the rrd file name associated to this interface above
capture the output and share it as well
1. Goto "data sources", select the corresponding DEVICE on the pickdown and then the INTERFACE we are testing for diagnose. capture a print screen and share the image to see the values
2. on your linux command line run
rrdtool info /yourcactitree/rra/xxxxxx.rrd (where xxxxxx is the rrd file name associated to this interface above
capture the output and share it as well
Re: Problem in cacti graph when traffic goes more than 114 M
please provide the folllowing outputs:
1. Goto "data sources", select the corresponding DEVICE on the pickdown and then the INTERFACE we are testing for diagnose. capture a print screen and share the image to see the values
2. on your linux command line run
rrdtool info /yourcactitree/rra/xxxxxx.rrd (where xxxxxx is the rrd file name associated to this interface above
capture the output and share it as well
1. Goto "data sources", select the corresponding DEVICE on the pickdown and then the INTERFACE we are testing for diagnose. capture a print screen and share the image to see the values
2. on your linux command line run
rrdtool info /yourcactitree/rra/xxxxxx.rrd (where xxxxxx is the rrd file name associated to this interface above
capture the output and share it as well
Who is online
Users browsing this forum: No registered users and 4 guests