Problem in cacti graph when traffic goes more than 114 Mb

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Developers, Moderators

Post Reply
shafikhan
Posts: 16
Joined: Wed Aug 15, 2012 3:42 am

Problem in cacti graph when traffic goes more than 114 Mb

Post by shafikhan »

Dear Sir,

We have some Gigabit Interfaces in which traffic flow more than 100 Mbps. Whenever traffic goes beyond 114 Mbps we get breaked graph as clearly shown in attached file.kindy see the attached graph document.

i check the cacti log file also it showing the following error.

08/30/2012 11:05:02 AM - SYSTEM STATS: Time:0.3101 Method:cmd.php Processes:2 Threads:N/A Hosts:4 HostsPerProcess:2 DataSources:7 RRDsProcessed:4
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] Host[46] DS[674] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10113'
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] Host[46] DS[669] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10107'
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] Host[46] DS[669] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10107'
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] Host[46] DS[665] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10102'
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] Host[46] DS[665] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10102'
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] Host[46] DS[674] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:05:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10113'
08/30/2012 11:05:01 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '60' seconds, with a maximum of a '300' second Cron, but 300 seconds have passed since the last poll!
08/30/2012 11:00:01 AM - SYSTEM STATS: Time:0.2082 Method:cmd.php Processes:2 Threads:N/A Hosts:4 HostsPerProcess:2 DataSources:6 RRDsProcessed:3
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] Host[46] DS[664] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10101'
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] Host[46] DS[664] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10101'
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] Host[46] DS[670] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10108'
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] Host[46] DS[670] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10108'
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] Host[46] DS[675] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10115'
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] Host[46] DS[675] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 11:00:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10115'
08/30/2012 11:00:01 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '60' seconds, with a maximum of a '300' second Cron, but 300 seconds have passed since the last poll!
08/30/2012 10:55:01 AM - SYSTEM STATS: Time:0.2086 Method:cmd.php Processes:2 Threads:N/A Hosts:4 HostsPerProcess:2 DataSources:10 RRDsProcessed:5
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[48] DS[679] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.100', and OID:'.1.3.6.1.2.1.31.1.1.1.6.27'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[48] DS[679] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.100', and OID:'.1.3.6.1.2.1.31.1.1.1.10.27'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[46] DS[672] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10111'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[46] DS[672] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10111'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[46] DS[666] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10103'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[46] DS[666] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10103'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[46] DS[676] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10116'
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] Host[46] DS[676] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:55:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10116'
08/30/2012 10:55:01 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '60' seconds, with a maximum of a '300' second Cron, but 299 seconds have passed since the last poll!
08/30/2012 10:50:02 AM - SYSTEM STATS: Time:0.2112 Method:cmd.php Processes:2 Threads:N/A Hosts:4 HostsPerProcess:2 DataSources:9 RRDsProcessed:5
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[48] DS[680] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.100', and OID:'.1.3.6.1.2.1.31.1.1.1.6.26'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[48] DS[680] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.100', and OID:'.1.3.6.1.2.1.31.1.1.1.10.26'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[46] DS[671] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10109'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[46] DS[671] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10109'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[46] DS[667] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10105'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[46] DS[667] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10105'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[46] DS[677] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10118'
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] Host[46] DS[677] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:50:02 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10118'
08/30/2012 10:50:02 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '60' seconds, with a maximum of a '300' second Cron, but 301 seconds have passed since the last poll!
08/30/2012 10:45:01 AM - SYSTEM STATS: Time:0.2081 Method:cmd.php Processes:2 Threads:N/A Hosts:4 HostsPerProcess:2 DataSources:9 RRDsProcessed:5
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] Host[46] DS[673] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10112'
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] Host[46] DS[673] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10112'
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] Host[46] DS[668] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10106'
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] Host[46] DS[668] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10106'
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] Host[46] DS[678] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.6.10122'
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] Host[46] DS[678] WARNING: Result from SNMP not valid. Partial Result: U
08/30/2012 10:45:01 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'172.30.25.99', and OID:'.1.3.6.1.2.1.31.1.1.1.10.10122'
08/30/2012 10:45:01 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '60' seconds, with a maximum of a '300' second Cron, but 300 seconds have passed since the last poll!




Thanks

shafi
Last edited by shafikhan on Thu Dec 06, 2012 8:03 am, edited 1 time in total.
User avatar
Linegod
Developer
Posts: 1626
Joined: Thu Feb 20, 2003 10:16 am
Location: Canada
Contact:

Re: Problem in cacti graph when traffic goes more than 114 M

Post by Linegod »

--
Live fast, die young
You're sucking up my bandwidth.

J.P. Pasnak,CD
CCNA, LPIC-1
http://www.warpedsystems.sk.ca
mmerelles
Posts: 18
Joined: Sat May 21, 2005 11:56 am

Re: Problem in cacti graph when traffic goes more than 114 M

Post by mmerelles »

It seems that each time you create a new graph, you leave the pickdown "select graph type" by default, which is IN/OUT bits. It means 32 bit snmp counters, so you will no be able to monitor heavy traffic.

Delete one of those graphs, and while your a creating it pay attention to the pickdown "select graph type", choose there IN/OUT bits (64 bit counters). That will lead you to monitor high speed bdw.

hope this helps
shafikhan
Posts: 16
Joined: Wed Aug 15, 2012 3:42 am

Re: Problem in cacti graph when traffic goes more than 114 M

Post by shafikhan »

Dear Sir,

i already change the snmp version 2 and 64 bit counter but i am still facing the same problem.

thanks
mmerelles
Posts: 18
Joined: Sat May 21, 2005 11:56 am

Re: Problem in cacti graph when traffic goes more than 114 M

Post by mmerelles »

please provide the folllowing outputs:

1. Goto "data sources", select the corresponding DEVICE on the pickdown and then the INTERFACE we are testing for diagnose. capture a print screen and share the image to see the values

2. on your linux command line run
rrdtool info /yourcactitree/rra/xxxxxx.rrd (where xxxxxx is the rrd file name associated to this interface above
capture the output and share it as well
mmerelles
Posts: 18
Joined: Sat May 21, 2005 11:56 am

Re: Problem in cacti graph when traffic goes more than 114 M

Post by mmerelles »

please provide the folllowing outputs:

1. Goto "data sources", select the corresponding DEVICE on the pickdown and then the INTERFACE we are testing for diagnose. capture a print screen and share the image to see the values

2. on your linux command line run
rrdtool info /yourcactitree/rra/xxxxxx.rrd (where xxxxxx is the rrd file name associated to this interface above
capture the output and share it as well
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests