No rrdfile update and Poller Output Table not Empty

[phkba]

After graphing for about a year a lot of graphs weren’t updating anymore.

08/19/2012 10:47:02 AM - POLLER: Poller[0] WARNING: Poller Output Table not Empty. Issues Found: 3194, Data Sources: traffic_in(DS[415]), traffic_out(DS[415]), traffic_in(DS[422]), traffic_out(DS[422]), traffic_in(DS[847]), traffic_out(DS[847]), traffic_in(DS[848]), traffic_out(DS[848]), traffic_in(DS[849]), traffic_out(DS[849]), traffic_in(DS[850]), traffic_out(DS[850]), traffic_in(DS[851]), traffic_out(DS[851]), traffic_in(DS[852]), traffic_out(DS[852]), traffic_in(DS[853]), traffic_out(DS[853]), traffic_in(DS[854]), traffic_out(DS[854]), Additional Issues Remain. Only showing first 20

I followed Gandalfs debugging instructions and the Datasources are being polled:

08/19/2012 10:47:02 AM - SPINE: Poller[0] Host[16] TH[1] DS[415] SNMP: v2: 10.56.0.202, dsname: traffic_in, oid: .1.3.6.1.2.1.31.1.1.1.6.49, value: 52105178869
08/19/2012 10:47:02 AM - SPINE: Poller[0] Host[16] TH[1] DS[415] SNMP: v2: 10.56.0.202, dsname: traffic_out, oid: .1.3.6.1.2.1.31.1.1.1.10.49, value: 26861405487

But the rrdtool update isn’t executed for the datasources.
Anyone that can help me find the problem of the missing rrdtool update command?

[gandalf]

We recently had the same issue. In all cases, the data sources where either broken or referring to e.g. interfaces, that were down and hence no longer polled succesfully.
R.

[phkba]

It happend to all traffic interfaces. Most of them were still up.
Ended up recreating all the graphs