Problems parsing Multi SNMP OID!

[pettres]

Hi,

I have problems, i'm using cactis Version 0.8.8a , I followed the instructions of the topic: http://forums.cacti.net/about10707.html .

Installation Steps:
1: Install SNMP-Informant Free Edition. It takes up little to no resources on a windows box (http://www.snmp-informant.com). I installed version 1.6 on the cactis server and on my server that i have monitoring, both server windows 2008r2

4: Copy the snmp_informant_disk.xml file into <cacti_path>/resources/snmp-queries/
5: Import the XML template for the graph (cacti_graph_template_w32_disk_statistics.xml)
6: Import the XML template for the data query (cacti_data_query_snmp_informant_disk_statistics.xml)

ERROR:
08/16/2012 12:00:11 PM - SPINE: Poller[0] Host[9] Description[acaraje12] ERROR: Problems parsing Multi SNMP OID! (oid: .1.3.6.1.4.1.9600.1.1.1.1.20..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108), Set MAX_OIDS to 1 for this host to isolate bad OID
08/16/2012 12:00:11 PM - SPINE: Poller[0] Host[9] Description[acaraje12] ERROR: Problems parsing Multi SNMP OID! (oid: .1.3.6.1.4.1.9600.1.1.1.1.19..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108), Set MAX_OIDS to 1 for this host to isolate bad OID
08/16/2012 12:00:11 PM - SPINE: Poller[0] Host[9] Description[acaraje12] ERROR: Problems parsing Multi SNMP OID! (oid: .1.3.6.1.4.1.9600.1.1.1.1.16..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108), Set MAX_OIDS to 1 for this host to isolate bad OID
08/16/2012 12:00:10 PM - SPINE: Poller[0] Host[9] Description[acaraje12] ERROR: Problems parsing Multi SNMP OID! (oid: .1.3.6.1.4.1.9600.1.1.1.1.2..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108), Set MAX_OIDS to 1 for this host to isolate bad OID
08/16/2012 12:00:10 PM - SPINE: Poller[0] Host[9] Description[acaraje12] ERROR: Problems parsing Multi SNMP OID! (oid: .1.3.6.1.4.1.9600.1.1.1.1.4..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108), Set MAX_OIDS to 1 for this host to isolate bad OID
08/16/2012 12:00:10 PM - SPINE: Poller[0] Host[9] Description[acaraje12] ERROR: Problems parsing Multi SNMP OID! (oid: .1.3.6.1.4.1.9600.1.1.1.1.5..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108), Set MAX_OIDS to 1 for this host to isolate bad OID
08/16/2012 12:00:10 PM - SPINE: Poller[0] Host[9] Description[acaraje12] ERROR: Problems parsing Multi SNMP OID! (oid: .1.3.6.1.4.1.9600.1.1.1.1.8..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108), Set MAX_OIDS to 1 for this host to isolate bad OID
08/16/2012 12:00:10 PM - SPINE: Poller[0] Host[9] Description[acaraje12] ERROR: Problems parsing Multi SNMP OID! (oid: .1.3.6.1.4.1.9600.1.1.1.1.9..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108), Set MAX_OIDS to 1 for this host to isolate bad OID

please help me!!!

[BSOD2600]

did you follow the instructions from Spine regarding MAX_OIDS ?
Any errors when using cmd.php?

[pettres]

Hi,

I Set MAX_OIDS to 1, but error continue!!

I changed poller type of "spine" to cmd.php, and error:


08/16/2012 02:50:01 PM - CMDPHP: Poller[0] Host[10] Description[prometheusdw] DS[177] Graphs['prometheusdw - Disk - _Total'] WARNING: Result from SNMP not valid. Partial Result: U
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'x.x.x.x', and OID:'.1.3.6.1.4.1.9600.1.1.1.1.20..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108'
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] Host[10] Description[prometheusdw] DS[177] Graphs['prometheusdw - Disk - _Total'] WARNING: Result from SNMP not valid. Partial Result: U
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'x.x.x.x', and OID:'.1.3.6.1.4.1.9600.1.1.1.1.16..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108'
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] Host[10] Description[prometheusdw] DS[177] Graphs['prometheusdw - Disk - _Total'] WARNING: Result from SNMP not valid. Partial Result: U
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'x.x.x.x', and OID:'.1.3.6.1.4.1.9600.1.1.1.1.19..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108'
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] Host[10] Description[prometheusdw] DS[177] Graphs['prometheusdw - Disk - _Total'] WARNING: Result from SNMP not valid. Partial Result: U
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'x.x.x.x', and OID:'.1.3.6.1.4.1.9600.1.1.1.1.2..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108'
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] Host[10] Description[prometheusdw] DS[177] Graphs['prometheusdw - Disk - _Total'] WARNING: Result from SNMP not valid. Partial Result: U
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'x.x.x.x', and OID:'.1.3.6.1.4.1.9600.1.1.1.1.4..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108'
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] Host[10] Description[prometheusdw] DS[177] Graphs['prometheusdw - Disk - _Total'] WARNING: Result from SNMP not valid. Partial Result: U
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'x.x.x.x', and OID:'.1.3.6.1.4.1.9600.1.1.1.1.5..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108'
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] Host[10] Description[prometheusdw] DS[177] Graphs['prometheusdw - Disk - _Total'] WARNING: Result from SNMP not valid. Partial Result: U
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'x.x.x.x', and OID:'.1.3.6.1.4.1.9600.1.1.1.1.8..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108'
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] Host[10] Description[prometheusdw] DS[177] Graphs['prometheusdw - Disk - _Total'] WARNING: Result from SNMP not valid. Partial Result: U
08/16/2012 02:50:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'x.x.x.x', and OID:'.1.3.6.1.4.1.9600.1.1.1.1.9..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108'

[BSOD2600]

where did you get this script from? The index it's creating is invalid. notice the two periods in the OID?
.1.3.6.1.4.1.9600.1.1.1.1.20..1.3.6.1.4.1.9600.1.1.1.1.1.6.95.84.111.116.97.108