Graphing Cisco wlc 5508 wireless controllers

[petpet1]

*** SOLVED***

Hi guys

I have the same problem :
Data Query [SNMP - Cisco WLC Radios] returns 0, however all other data queries return some values

When i do verbose query i get:

+ Running data query [31].
+ Found type = '6' [Script Query - Script Server].
+ Found data query XML file at 'path_to_cacti/cacti/resource/script_server/Cisco_WLC_Radios.xml'
+ XML file parsed ok.
+ Invalid field <index_order>bsnAPRadioParrentName:bsnAPRadioIndex</index_order>
+ Must contain <direction>input</direction> fields only

Any idea ?

Thanks a lot

[alexsw]

*** SOLVED***

Hi guys

I have the same problem :
Data Query [SNMP - Cisco WLC Radios] returns 0, however all other data queries return some values

When i do verbose query i get:

+ Running data query [31].
+ Found type = '6' [Script Query - Script Server].
+ Found data query XML file at 'path_to_cacti/cacti/resource/script_server/Cisco_WLC_Radios.xml'
+ XML file parsed ok.
+ Invalid field <index_order>bsnAPRadioParrentName:bsnAPRadioIndex</index_order>
+ Must contain <direction>input</direction> fields only

Any idea ?

Thanks a lot

Hi!
How do you solved this?
I have same problem...

[noname]

<index_order>bsnAPRadioParrentName:bsnAPRadioIndex</index_order>

Probably typo of 'bsnAPRadioParentName'.

[alexsw]

<index_order>bsnAPRadioParrentName:bsnAPRadioIndex</index_order>

Probably typo of 'bsnAPRadioParentName'.

Thanks, I corrected it but there are still many other problems. Most charts are not displayed:


Poller debug:


Data source Debug:









Data query debug:





Status:


How can I fix it?

[noname]

I can see this line at several part..

+ Found index: Segmentation fault

Is this normal?

[alexsw]

I can see this line at several part..

+ Found index: Segmentation fault

Is this normal?

Error "Segmentation fault" disappears if I comment out the lines 8 and 14 in php.ini:

extension=ctype.so
extension=dom.so
extension=filter.so
extension=hash.so
extension=iconv.so
extension=json.so
extension=pdo.so
#extension=pdo_sqlite.so
extension=phar.so
extension=posix.so
extension=session.so
extension=simplexml.so
extension=sqlite.so
#extension=sqlite3.so
extension=tokenizer.so
extension=xml.so
extension=xmlreader.so
extension=xmlwriter.so
extension=mysql.so
extension=mbstring.so
extension=bz2.so
extension=openssl.so
extension=zlib.so
extension=mcrypt.so
extension=zip.so
extension=apc.so
extension=mysqli.so
extension=gd.so
extension=sockets.so
extension=snmp.so

but the graphs are not drawn and Poller errors stays

P.S. sorry for bad english

[noname]

If you perform snmpwalk against the OID whose graph wasn't displayed, does it succeed?

To know its OID, please see particular script -- for example:
* Power Levels = .1.3.6.1.4.1.14179.2.2.2.1.6
* Rogue Alerts = .1.3.6.1.4.1.14179.2.1.7.1.24

[alexsw]

Cisco_WLC_Power_Level.php
$bsnAPIfPhyTxPowerLevel = ".1.3.6.1.4.1.14179.2.2.2.1.6";

syslog# snmpwalk -c XXXXXXX -v 2c 192.168.1.10 .1.3.6.1.4.1.14179.2.2.2.1.6
SNMPv2-SMI::enterprises.14179.2.2.2.1.6.0.31.158.64.187.176.0 = INTEGER: 1
SNMPv2-SMI::enterprises.14179.2.2.2.1.6.0.31.158.64.187.176.1 = INTEGER: 1
SNMPv2-SMI::enterprises.14179.2.2.2.1.6.0.35.94.74.28.80.0 = INTEGER: 1
SNMPv2-SMI::enterprises.14179.2.2.2.1.6.0.35.94.74.28.80.1 = INTEGER: 1
SNMPv2-SMI::enterprises.14179.2.2.2.1.6.0.35.94.74.32.176.0 = INTEGER: 1
SNMPv2-SMI::enterprises.14179.2.2.2.1.6.0.35.94.74.32.176.1 = INTEGER: 1
SNMPv2-SMI::enterprises.14179.2.2.2.1.6.0.35.94.74.38.192.0 = INTEGER: 1
SNMPv2-SMI::enterprises.14179.2.2.2.1.6.0.35.94.74.38.192.1 = INTEGER: 1
SNMPv2-SMI::enterprises.14179.2.2.2.1.6.0.35.94.150.71.144.0 = INTEGER: 1
SNMPv2-SMI::enterprises.14179.2.2.2.1.6.0.35.94.150.71.144.1 = INTEGER: 1
SNMPv2-SMI::enterprises.14179.2.2.2.1.6.0.35.94.150.87.48.0 = INTEGER: 1
SNMPv2-SMI::enterprises.14179.2.2.2.1.6.0.35.94.150.87.48.1 = INTEGER: 1

Cisco_WLC_Rogue_Alerts.php
$bsnRogueAPEntry = ".1.3.6.1.4.1.14179.2.1.7.1.24";

syslog# snmpwalk -c XXXXXX -v 2c 192.168.1.10 .1.3.6.1.4.1.14179.2.1.7.1.24
SNMPv2-SMI::enterprises.14179.2.1.7.1.24.0.20.108.212.43.222 = INTEGER: 2
SNMPv2-SMI::enterprises.14179.2.1.7.1.24.0.20.209.182.170.89 = INTEGER: 2
SNMPv2-SMI::enterprises.14179.2.1.7.1.24.0.27.17.64.5.102 = INTEGER: 2
SNMPv2-SMI::enterprises.14179.2.1.7.1.24.0.39.25.221.196.138 = INTEGER: 1
SNMPv2-SMI::enterprises.14179.2.1.7.1.24.28.175.247.150.183.151 = INTEGER: 2
SNMPv2-SMI::enterprises.14179.2.1.7.1.24.52.8.4.19.20.64 = INTEGER: 2
SNMPv2-SMI::enterprises.14179.2.1.7.1.24.132.201.178.255.42.118 = INTEGER: 2
SNMPv2-SMI::enterprises.14179.2.1.7.1.24.196.61.199.84.82.138 = INTEGER: 2
SNMPv2-SMI::enterprises.14179.2.1.7.1.24.224.203.78.59.162.168 = INTEGER: 2

Cisco_WLC_Station_Algorithm.php
$bsnMobileAuthenticationAlgorithm = ".1.3.6.1.4.1.14179.2.1.4.1.19";

syslog# snmpwalk -c XXXXXX -v 2c 192.168.1.10 .1.3.6.1.4.1.14179.2.1.4.1.19
SNMPv2-SMI::enterprises.14179.2.1.4.1.19.4.70.101.237.132.130 = INTEGER: 0
SNMPv2-SMI::enterprises.14179.2.1.4.1.19.20.143.198.115.118.133 = INTEGER: 0
SNMPv2-SMI::enterprises.14179.2.1.4.1.19.52.81.201.71.129.126 = INTEGER: 0
SNMPv2-SMI::enterprises.14179.2.1.4.1.19.144.33.85.194.44.213 = INTEGER: 0
SNMPv2-SMI::enterprises.14179.2.1.4.1.19.172.147.47.74.156.172 = INTEGER: 0
SNMPv2-SMI::enterprises.14179.2.1.4.1.19.240.180.121.144.237.32 = INTEGER: 0

Cisco_WLC_Station_CCX.php
$bsnMobileStationCcxVersion = ".1.3.6.1.4.1.14179.2.1.4.1.33";

syslog# snmpwalk -c XXXXX -v 2c 192.168.1.10 .1.3.6.1.4.1.14179.2.1.4.1.33
SNMPv2-SMI::enterprises.14179.2.1.4.1.33.0.35.108.11.33.100 = INTEGER: 0
SNMPv2-SMI::enterprises.14179.2.1.4.1.33.4.70.101.237.132.130 = INTEGER: 0
SNMPv2-SMI::enterprises.14179.2.1.4.1.33.20.143.198.115.118.133 = INTEGER: 0
SNMPv2-SMI::enterprises.14179.2.1.4.1.33.52.81.201.71.129.126 = INTEGER: 0
SNMPv2-SMI::enterprises.14179.2.1.4.1.33.144.33.85.194.44.213 = INTEGER: 0
SNMPv2-SMI::enterprises.14179.2.1.4.1.33.172.147.47.74.156.172 = INTEGER: 4
SNMPv2-SMI::enterprises.14179.2.1.4.1.33.240.180.121.144.237.32 = INTEGER: 0

Cisco_WLC_Station_Cipher.php
$bsnMobileEncryptionCipher = ".1.3.6.1.4.1.14179.2.1.4.1.31";

syslog# snmpwalk -c XXXXXX -v 2c 192.168.1.10 .1.3.6.1.4.1.14179.2.1.4.1.31
SNMPv2-SMI::enterprises.14179.2.1.4.1.31.0.35.108.11.33.100 = INTEGER: 5
SNMPv2-SMI::enterprises.14179.2.1.4.1.31.20.143.198.115.118.133 = INTEGER: 5
SNMPv2-SMI::enterprises.14179.2.1.4.1.31.52.81.201.71.129.126 = INTEGER: 5
SNMPv2-SMI::enterprises.14179.2.1.4.1.31.144.33.85.194.44.213 = INTEGER: 5
SNMPv2-SMI::enterprises.14179.2.1.4.1.31.172.147.47.74.156.172 = INTEGER: 5
SNMPv2-SMI::enterprises.14179.2.1.4.1.31.240.180.121.144.237.32 = INTEGER: 5

Cisco_WLC_Station_EAP_Type.php
$bsnMobileStationEapType = ".1.3.6.1.4.1.14179.2.1.4.1.32";

syslog# snmpwalk -c XXXXXXXX-v 2c 192.168.1.10 .1.3.6.1.4.1.14179.2.1.4.1.32
SNMPv2-SMI::enterprises.14179.2.1.4.1.32.0.35.108.11.33.100 = INTEGER: 7
SNMPv2-SMI::enterprises.14179.2.1.4.1.32.20.143.198.115.118.133 = INTEGER: 7
SNMPv2-SMI::enterprises.14179.2.1.4.1.32.52.81.201.71.129.126 = INTEGER: 7
SNMPv2-SMI::enterprises.14179.2.1.4.1.32.144.33.85.194.44.213 = INTEGER: 7
SNMPv2-SMI::enterprises.14179.2.1.4.1.32.172.147.47.74.156.172 = INTEGER: 7
SNMPv2-SMI::enterprises.14179.2.1.4.1.32.240.180.121.144.237.32 = INTEGER: 7

Cisco_WLC_Station_Policy.php
$bsnMobileStationPolicyType = ".1.3.6.1.4.1.14179.2.1.4.1.30";

syslog# snmpwalk -c XXXXXXX -v 2c 192.168.1.10 .1.3.6.1.4.1.14179.2.1.4.1.30
SNMPv2-SMI::enterprises.14179.2.1.4.1.30.0.35.108.11.33.100 = INTEGER: 4
SNMPv2-SMI::enterprises.14179.2.1.4.1.30.4.70.101.237.132.130 = INTEGER: 4
SNMPv2-SMI::enterprises.14179.2.1.4.1.30.20.143.198.115.118.133 = INTEGER: 4
SNMPv2-SMI::enterprises.14179.2.1.4.1.30.52.81.201.71.129.126 = INTEGER: 4
SNMPv2-SMI::enterprises.14179.2.1.4.1.30.144.33.85.194.44.213 = INTEGER: 4
SNMPv2-SMI::enterprises.14179.2.1.4.1.30.172.147.47.74.156.172 = INTEGER: 4
SNMPv2-SMI::enterprises.14179.2.1.4.1.30.240.180.121.144.237.32 = INTEGER: 4

Cisco_WLC_Station_Protocol.php
$bsnMobileProtocol = ".1.3.6.1.4.1.14179.2.1.4.1.25";

syslog# snmpwalk -c XXXXXX -v 2c 192.168.1.10 .1.3.6.1.4.1.14179.2.1.4.1.25
SNMPv2-SMI::enterprises.14179.2.1.4.1.25.0.35.108.11.33.100 = INTEGER: 3
SNMPv2-SMI::enterprises.14179.2.1.4.1.25.4.70.101.237.132.130 = INTEGER: 3
SNMPv2-SMI::enterprises.14179.2.1.4.1.25.20.143.198.115.118.133 = INTEGER: 3
SNMPv2-SMI::enterprises.14179.2.1.4.1.25.52.81.201.71.129.126 = INTEGER: 1
SNMPv2-SMI::enterprises.14179.2.1.4.1.25.144.33.85.194.44.213 = INTEGER: 3
SNMPv2-SMI::enterprises.14179.2.1.4.1.25.172.147.47.74.156.172 = INTEGER: 3
SNMPv2-SMI::enterprises.14179.2.1.4.1.25.240.180.121.144.237.32 = INTEGER: 3

Cisco_WLC_Station_Status.php
$bsnMobileStationStatus = ".1.3.6.1.4.1.14179.2.1.4.1.9";

syslog# snmpwalk -c XXXXXX -v 2c 192.168.1.10 .1.3.6.1.4.1.14179.2.1.4.1.9
SNMPv2-SMI::enterprises.14179.2.1.4.1.9.0.35.108.11.33.100 = INTEGER: 3
SNMPv2-SMI::enterprises.14179.2.1.4.1.9.4.70.101.237.132.130 = INTEGER: 3
SNMPv2-SMI::enterprises.14179.2.1.4.1.9.20.143.198.115.118.133 = INTEGER: 3
SNMPv2-SMI::enterprises.14179.2.1.4.1.9.24.231.244.233.9.164 = INTEGER: 3
SNMPv2-SMI::enterprises.14179.2.1.4.1.9.52.81.201.71.129.126 = INTEGER: 3
SNMPv2-SMI::enterprises.14179.2.1.4.1.9.144.33.85.194.44.213 = INTEGER: 3
SNMPv2-SMI::enterprises.14179.2.1.4.1.9.172.147.47.74.156.172 = INTEGER: 3
SNMPv2-SMI::enterprises.14179.2.1.4.1.9.240.180.121.144.237.32 = INTEGER: 3

[alexsw]

There are some ideas =)?

[pzi]

Hi

Thanks for great templates. I have just one problem with them (as for now ): TX Frames has 0 on all graphs for all AP's:

graph_image.jpg (39.36 KiB) Viewed 9766 times

I can't find source of this problem. All other graphs works perfect.

[petpet1]

Hi
i realized that i have a troubles with the script Cisco_WLC_Radios.php
Unfortunaltey it find and describe only particular APs, in my case AIR-LAP1131AG-E-K9.
I have few WLCs and the result is the same
Here is the verbose output:

+ Running data query [25].
+ Found type = '6' [Script Query - Script Server].
+ Found data query XML file at '/srv/www/htdocs/cacti/resource/script_server/Cisco_WLC_Radios.xml'
+ XML file parsed ok.
+ <arg_num_indexes> missing in XML file, 'Index Count Changed' not supported
+ Executing script for list of indexes '"/usr/bin/php" -q /srv/www/htdocs/cacti/scripts/Cisco_WLC_Radios.php xxxx 431 2:1613:10:public:::::: index' Index Count: 58
+ Found index: 29.161.118.244.48.0
+ Found index: 29.161.118.244.48.1
+ Found index: 29.161.119.63.192.0
+ Found index: 29.161.119.63.192.1
+ Found index: 29.161.119.69.96.0
+ Found index: 29.161.119.69.96.1
+ Found index: 29.161.119.70.112.0
+ Found index: 29.161.119.70.112.1
+ Found index: 29.161.119.75.64.0
+ Found index: 29.161.119.75.64.1
+ Found index: 58.152.41.151.96.0
+ Found index: 58.152.41.151.96.1
+ Found index: 1.3.6.1.4.1.14179.2.2.13.1.1.68.228.217.63.31.112.0
+ Found index: 1.3.6.1.4.1.14179.2.2.13.1.1.68.228.217.63.31.112.1
+ Found index: 1.3.6.1.4.1.14179.2.2.13.1.1.68.228.217.63.49.224.0
+ Found index: 1.3.6.1.4.1.14179.2.2.13.1.1.68.228.217.63.49.224.1
+ Found index: 1.3.6.1.4.1.14179.2.2.13.1.1.68.228.217.63.70.80.0
+ Found index: 1.3.6.1.4.1.14179.2.2.13.1.1.68.228.217.63.70.80.1
+ Found index: 1.3.6.1.4.1.14179.2.2.13.1.1.180.164.227.180.221.0.0
+ Found index: 1.3.6.1.4.1.14179.2.2.13.1.1.180.164.227.180.221.0.1
+ Found index: 1.3.6.1.4.1.14179.2.2.13.1.1.184.190.191.254.165.48.0

And the screenshot too

thanks a lot for any help or advice
pet

[pavelch]

Hello.
Thanks for template! All graphics were created normally except for noise/interference. I undestand so that this relate with upper/lower limits because graph shows only zero value. Snmpwalk returns right values, like this:
SNMPv2-SMI::enterprises.14179.2.2.15.1.21.184.190.191.105.159.0.0.1 = INTEGER: -99
SNMPv2-SMI::enterprises.14179.2.2.15.1.21.184.190.191.105.159.0.0.2 = INTEGER: -99
SNMPv2-SMI::enterprises.14179.2.2.15.1.21.184.190.191.105.159.0.0.3 = INTEGER: -99
SNMPv2-SMI::enterprises.14179.2.2.15.1.21.184.190.191.105.159.0.0.4 = INTEGER: -99
SNMPv2-SMI::enterprises.14179.2.2.15.1.21.184.190.191.105.159.0.0.5 = INTEGER: -99
SNMPv2-SMI::enterprises.14179.2.2.15.1.21.184.190.191.105.159.0.0.6 = INTEGER: -99
SNMPv2-SMI::enterprises.14179.2.2.15.1.21.184.190.191.105.159.0.0.7 = INTEGER: -99
SNMPv2-SMI::enterprises.14179.2.2.15.1.21.184.190.191.105.159.0.0.8 = INTEGER: -99
SNMPv2-SMI::enterprises.14179.2.2.15.1.21.184.190.191.105.159.0.0.9 = INTEGER: -98
Can anyone explain what's wrong?

[jxkoepk]

Seems like almost all of the graphs work for me except Rouge Clients, Station Algorithm, and a few others. All of the non working graphs have the errors below:

Code: Select all

06/11/2012 11:20:04 AM - CMDPHP: Poller[0] Host[2] DS[71] WARNING: Result from CMD not valid.  Partial Result: U
06/11/2012 11:20:04 AM - CMDPHP: Poller[0] Host[2] DS[71] CMD: php -q /usr/local/share/cacti/scripts/Cisco_WLC_Rogue_Alerts.php 10.x.x.x public 2, output: U
06/11/2012 11:20:04 AM - POLLER: Poller[0] CACTI2RRD: /usr/local/bin/rrdtool update /usr/local/share/cacti/rra/wlc_pending_71.rrd --template  1339438800:U

but if I run the script manually as the log does

Code: Select all

cacti# php -q /usr/local/share/cacti/scripts/Cisco_WLC_Rogue_Alerts.php 10.10.0.20 public 2
reta:0 retb:0 retc:2 retd:0 rete:0 retf:0 retg:0 reth:0 reti:0 retj:0 retk:0
cacti#

the returned data looks correct. Running Cacti 0.8.8a on FreeBSD 8.2-RELEASE amd64

[jxkoepk]

Seems like almost all of the graphs work for me except Rouge Clients, Station Algorithm, and a few others. All of the non working graphs have the errors below:

Code: Select all

06/11/2012 11:20:04 AM - CMDPHP: Poller[0] Host[2] DS[71] WARNING: Result from CMD not valid.  Partial Result: U
06/11/2012 11:20:04 AM - CMDPHP: Poller[0] Host[2] DS[71] CMD: php -q /usr/local/share/cacti/scripts/Cisco_WLC_Rogue_Alerts.php 10.x.x.x public 2, output: U
06/11/2012 11:20:04 AM - POLLER: Poller[0] CACTI2RRD: /usr/local/bin/rrdtool update /usr/local/share/cacti/rra/wlc_pending_71.rrd --template  1339438800:U

but if I run the script manually as the log does

Code: Select all

cacti# php -q /usr/local/share/cacti/scripts/Cisco_WLC_Rogue_Alerts.php 10.10.0.20 public 2
reta:0 retb:0 retc:2 retd:0 rete:0 retf:0 retg:0 reth:0 reti:0 retj:0 retk:0
cacti#

the returned data looks correct. Running Cacti 0.8.8a on FreeBSD 8.2-RELEASE amd64

Ok so to make it even more confusing... If I run

Code: Select all

cacti# sudo -u cacti /usr/local/bin/php /usr/local/share/cacti/poller.php --force

then it does not error...

Code: Select all

06/11/2012 12:40:52 PM - CMDPHP: Poller[0] Host[2] DS[72] CMD: php -q /usr/local/share/cacti/scripts/Cisco_WLC_Station_Algorithm.php 10.x.x.x public 2, output: stationauthopen:0 stationauthsharedkey:0 stationauthunknown:0 stationopenandeap:0
06/11/2012 12:40:52 PM - POLLER: Poller[0] Parsed MULTI output field 'stationauthopen:0' [map stationauthopen->stationauthopen]
06/11/2012 12:40:52 PM - POLLER: Poller[0] Parsed MULTI output field 'stationauthsharedkey:0' [map stationauthsharedkey->stationauthshared]
06/11/2012 12:40:52 PM - POLLER: Poller[0] Parsed MULTI output field 'stationauthunknown:0' [map stationauthunknown->stationauthunknown]
06/11/2012 12:40:52 PM - POLLER: Poller[0] Parsed MULTI output field 'stationopenandeap:0' [map stationopenandeap->stationopenandeap]
06/11/2012 12:40:52 PM - POLLER: Poller[0] CACTI2RRD: /usr/local/bin/rrdtool update /usr/local/share/cacti/rra/wlc_stationauthshared_72.rrd --template stationauthopen:stationauthshared:stationauthunknown:stationopenandeap 1339443647:0:0:0:0

[striker33]

Thanks for the excellent work.All graphs are working except the CPU Usage, did anyone else run into this issue..