juniper router

[pabloinc]

Good afternoon
Cacti can graph interfaces on a Juniper router

I have the problem tells me

SNMP Information
SNMP error

[gandalf]

Those errors show up in cases, where incorrect SNMP credentials are used (e.g. wrong or invalid community string)
R.

[Swiftie]

Hi guys

Sorry to revive such an old thread but I'm having similar issues with Juniper SSG5 devices thus far where I've made sure that the community name is matching from the wanting to be monitored firewall end and on Cacti's devices end. I've checked that the interface I want to monitor has SNMP enabled aswell. But so far no go. Other devices which are Cisco are working with no problems at all.

Is there anything special that I'm missing for the Juniper?

[gandalf]

Please see 2nd link of my sig. This should help to track the issue
R.

[Swiftie]

Please see 2nd link of my sig. This should help to track the issue
R.

From checking the 2nd link. I'm just going through the majority of the steps now with no issues found thus far.

Also if I try and do a verbose query on the device I end with the below debug info.

Code: Select all

+ Running data query [1].
+ Found type = '3' [SNMP Query].
+ Found data query XML file at '/usr/share/cacti/site/resource/snmp_queries/interface.xml'
+ XML file parsed ok.
+ Executing SNMP get for num of indexes @ '.1.3.6.1.2.1.2.1.0' Index Count: 
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.2.2.1.1' Index Count: 0
+ No SNMP data returned

Do I need a specific host template?

[gandalf]

Well, in case there are no indexes, there's indeed nothing to poll.
R.