Cisco FWSM NAT

[alphafilter]

Does anyone have a template for tracking Xlate count in a Cisco FWSM. I tried altering the template from Selenius with the correct OID but it does not seem to be working. The graph just comes back with NAN. I can SNMP walk the device and OID from the box cacti is installed on, below are the results.

Any help would be greatly appreciated.

xxxxxxxx:~# snmpwalk -c <my community> -v 2c <my host> 1.3.6.1.4.1.9.9.532.1.1.1.1
iso.3.6.1.4.1.9.9.532.1.1.1.1.1 = Gauge32: 10710

Thanks

[budkow]

I'm having the same issue. Hoping someone can help out.

[alphafilter]

Drumming this back up still have not been able to get anything to work and this is the last piece that I need in order to shut an older system down. Any help would be greatly appreciated.